Samsung SV-4000, Instruction Manual

ENG-14

Presetting the Stations Manually

Your VCR contains a built-in tuner used to receive
television broadcasts.

You must preset the stations received through the tuner.
This can be done:

◆

Plug & Auto Set up (see page 10)

◆

Automatically (see page 13)

◆

Manually 

You can store up to 80 stations.

☛  

You do not need to preset the stations manually if

you have already set them automatically.

1

Press the MENU button on the remote control.
Result: The programming menu is displayed.

2

Press the corresponding 

,

❷

or 

➛

, 

❿

buttons to 

select the INSTALLATION option. 

3

Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.

4

Press the corresponding 

or 

❷

buttons, until the 

MANUAL SET UP option is selected.

5

Press the 

❿

button to select MANUAL SET UP option. 

Result: The TV STATION TABLE menu is displayed.

6

Press the 

or 

❷

buttons to select a programme 

number as required.   

7

Press the 

❿

button to preset the station.

Result: The MANUAL TUNING menu is displayed.

8

Press the 

or 

❷

buttons until the CH is selected.

9

Press the 

➛

or 

❿

buttons to start scanning.

Result: The frequency band is scanned and the

first station found is displayed.

If you know the number of the channel you want, 
press the numeric buttons on the remote control for
example, for channel 04, first press “0” and then 
press “0”, “4” (see page 31).

10

If you...

Then...

Wish to store the

◆

Press the corresponding 

,

station displayed

❷

buttons, until the MFT is 

selected.

◆

Press the 

➛

or

❿

buttons to 

adjust the picture, if necessary.

◆

Press OK to store the station

Do not wish to 

◆

Press the corresponding 

,

store the station

❷

buttons, until the CH is 

displayed selected.

◆

Press the 

➛

or

❿

buttons to 

go on scanning the 
frequency band and display 

the next station

◆

Go back to the beginning of 

Step 9

11

Repeat this procedure from Step 6 onwards, until 
all the required stations have been stored.

12

On completion, press the MENU button three times 
to exit the menu.

** MANUAL TUNING **

PR

: 1

CH

: ---

SYSTEM

: -

MFT

: -

❷

➛❿

MEMORY: 

OK

MENU

  INSTALL    

AUTO SET UP

MANUAL SET UP

TV SYSTEM     :G
VCR OUTPUT CH :CH36

❷

❿

END:

MENU

** TV STATION TABLE **

PR

CH SYSTEM 

1

002

B/G

2

---

B/G

3

---

B/G

4

---

B/G

5

---

B/G

❷

❿

SWAPPING: 

OK

DELETE: 

CLR/RST

MENU

02125A SV-4000/HACO-eng  3/19/04 4:04 PM  Page 14