Samsung SV-4000 Instruction Manual Download

Page: 20 / 31

ENG-20

Selecting the Colour Mode

Before recording or playing back a cassette, you can

select the required system standard.

➢

◆

When you playback an NTSC-recorded tape
on this VCR make a setting on the colour
system according to your TV.
If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43
compatible), set NT4.43 and you can record
NT4.43.

Press MENU on the remote control.
Result: The programming menu is displayed.

Press the corresponding

❷

➛

❿

buttons to

select the USER SET option.

Press the OK button to select this option.
Result: The USER SET menu is displayed.

Press the corresponding

❷

buttons, until the

COLOUR SYSTEM option is selected.

Press the

❿

button to select AUTO

➝

PAL

➝

MESECAM

➝

B/W or NT3.58

➝

NT4.43

➝

NTPB.

AUTO When playing back a cassette, the system

standard is automatically selected by the
VCR.

B/W Black and White

On completion, press MENU twice to exit the menu.

The Intelligent Picture Control Feature allows you to

adjust the sharpness of the image automatically,

according to your own preferences.

During playback, press the MENU button on the
remote control.
Result: The programming menu is displayed.

Press the corresponding

❷

➛

❿

buttons to

select the USER SET option.

Press the OK button to select this option.
Result: The USER SET menu is displayed.

Press the corresponding

❷

buttons, until the

IPC option is selected.

Press the

❿

button to select the IPC (intelligent

picture control) option.

➢

When intelligent picture control mode is ON, the
sharpness of the image is adjusted
automatically.

To adjust the sharpness manually, press the

❷

button to turn the IPC mode OFF.

Press the

➛

❿

buttons until the picture is

displayed according to your preferences.

➢

If you do not press a button within ten seconds,
the PICTURE menu disappears automatically.

On completion, press the MENU button again.

Intelligent Picture Control

❷

➛❿

END:

MENU

PROG OPTIONS INSTALL

CLOCK BONUS LANG

OPTIONS

USER SET

OPTIONS

OSD

:ON

TAPE SELECT

:E180

COLOUR SYSTEM

:AUTO

NICAM

:ON

IPC

:ON

❷

❿

END:

MENU

02125A SV-4000/HACO-eng 3/19/04 4:04 PM Page 20

Summary of Contents for SV-4000
































Search results

Summary of Contents for SV-4000

Reviews:

Related manuals for SV-4000

Brands by name

Popular brands

Samsung SV-4000, Instruction Manual

Search results

Summary of Contents for SV-4000

Reviews:

Related manuals for SV-4000

Brands by name

Popular brands