background image

ENG-22

Searching for a Specific Sequence

Each time you record a cassette on this VCR, an

“index” is automatically marked on the tape when

recording starts.

The Search function allows you to fast-forward or

rewind to a specific index and start playback from that

point. Depending on the direction selected, the indexes

are numbered as follows:

This VCR uses a standard indexing system (VISS).
As a result, it will recognize any indexes marked
by other VCRs using the same system and vice
versa.

INTRO SCAN

1

To search for a specific index, press INDEX.

2

Press the 

➛➛

or 

❿❿

buttons depending on the 

direction where your desired programme is located. 

3

When an Index mark is found the VCR will 
playback the tape for 5 seconds, after which it will 
continue searching for the next Index mark. 

4

If you want to watch the tape from a particular 
Index, simply press 

ll

Index Skip Search: 

This feature will enable you to fast forward/rewind to a

specific point on a tape:  E.g. if you have recorded 3

different programmes on a tape and you have rewound

the tape to the beginning, by using this feature you can

go directly to the start of programme 2 simply by

pressing the INDEX button.

1

Press the INDEX to start the Index search. 

2

Press the 

➛➛

or 

❿❿

buttons twice more. This will 

take you directly to the start of the desired 
programme is located.  

2

1

1

2

etc.

Prev

Seq.

Seq. being

played

Next

Seq.

etc.

INDEX: 

➛➛ ❿❿

Picture Search enables you to Fast Forward or Rewind

and look for a particular part of a tape.

1

Press PLAY, the VCR will enter normal play mode. 
While in play, press and release the 

❿❿

(or 

➛➛

)

button. The VCR will search at 5 times the normal 
playback speed. 

2

To return to normal playback mode, press the 

ll

button. 

3

If you press and HOLD down the 

❿❿

(or 

➛➛

) button

the VCR will search at  9 times the normal speed. 
Releasing the 

❿❿

button will return the VCR to 

search at 5 times the normal speed. To return to 
normal playback mode, press the 

ll

button. 

4

Whilst in Picture Search mode, if you press the 

❿❿

button again, the VCR will enter normal Fast 
Forward mode. 

5

Likewise, whilst in Picture Search 

➛➛

mode, if you 

press the 

➛➛

button again, the VCR will enter 

normal Rewind mode. 

6

If, when Redwing (

➛➛

) or Fast Forwarding (

❿❿

), 

you press the 

➛➛

(or 

❿❿

) button, the VCR will enter

the Picture Search mode.

Picture Search, Fast
Forward/Rewind

You can vary the playback speed using the Shuttle

function (up to nine times the normal speed).
Example:

You wish to analyze a sportsperson’s 

technique, movement by movement.

The Shuttle function is available on the:

Remote control

No sound is heard when playing a sequence at
variable speeds.

1

Press:

ll

during playback

SHUTTLE (

) to play the cassette backwards

SHUTTLE (

) to play the cassette forwards

2

Each time you press a SHUTTLE (               ) 
button, the speed is changed. 

SHUTTLE

Playing a Sequence at Variable
Speeds 

02125A SV-4000/HACO-eng  3/19/04 4:04 PM  Page 22

Summary of Contents for SV-4000
































Reviews: