GB
19
GB
18
If you have stored a TV station:
◆
That you do not require
◆
At the wrong programme position
you can cancel it.
1
Press the MENU button on the remote control.
2
Press the corresponding
or
buttons, until the cursor is
placed in front of the
I N S T A L L A T I O N
option.
3
Press the
button to select this option.
Result:
The
I N S T A L L A T I O N
menu is displayed.
4
Press the corresponding
or
buttons, until the cursor is
placed in front of the
TV STATION TABLE
option.
5
Press the
button to select this option.
Result:
The
TV STATION TABLE
menu is displayed.
6
Press the corresponding
or
buttons, until the cursor is
placed in front of the required preset TV station. (
P R
)
7
Press the CLR/RST button.
Result:
PLEASE WAIT
is displayed.
8
Repeat the same procedure from Step
6
onwards until all the
required stations have been cleared.
9
On completion, press the MENU button three times to exit the
menu.
Clearing a Preset Station
* *M E N U * *
TIMER PROGRAMMING
USER SET
I N S T A L L A T I O N
CLOCK SET
EASY OPERATION
E N D :
M E N U
* *TV STATION TABLE * *
P R
CH
NAME
1
021 ----
2
025 - - - -
3
030
- - - -
4
065
- - - -
5
055
- - - -
PLEASE WAIT
* *TV STATION TABLE * *
P R
CH
NAME
1
021 ----
2
025 - - - -
3
030
- - - -
4
065
- - - -
5
055
----
S E T :
S O R T :
O K
D E L E T E :
C L R / R S T
M E N U
Your VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can
be done:
◆
Plug & Auto Set up (see page 13)
◆
Automatically (see page 17)
◆
Manually
You can store up to 99 stations.
☛
You do not need to preset the stations manually if you
have already set them automatically.
1
Press the MENU button on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
or
buttons, until the cursor is
placed in front of the
I N S T A L L A T I O N
option.
3
Press the
button to select this option.
Result:
The
I N S T A L L A T I O N
menu is displayed.
4
Press the corresponding
or
buttons, until the cursor is
placed in front of the
MANUAL SET UP
option.
5
Press the
button to select a
MANUAL SET UP
option.
6
Press the
button until the cursor is placed in front of the
channel number.
7
Press the
or
buttons to start scanning.
Result:
The frequency band is scanned and the first station
found is displayed.
8
If you...
Then...
Wish to store the
◆
Press the
button once to place the
station displayed
cursor in front of the
M F T
.
◆
Press the
or
buttons to adjust the
picture, if necessary.
◆
Press the
button until the cursor is
placed in front of the
P R
(Programme
number).
◆
Press the
or
buttons to select
a programme number as required.
◆
Press OK to store the station
Do notwish to
◆
Press the
or
buttons to go on
store the station
scanning the frequency band and display
displayed
the next station
◆
Go back to the beginning of Step
8
9
Repeat this procedure from Step
6
onwards, until all the required
stations have been stored.
10
On completion, press the MENU button three times to exit the
menu.
Presetting the Stations Manually
7
8
7
* *M E N U * *
TIMER PROGRAMMING
USER SET
I N S T A L L A T I O N
CLOCK SET
EASY OPERATION
E N D :
M E N U
* *INSTALLATION * *
AUTO SET UP
MANUAL SET UP
TV STATION TABLE
VCR OUTPUT CH :CH60
E N
D:
M E N U
* *MANUAL SET UP * *
PR : 1
CH
: 021
MFT : -
M E M O R Y:
O K
E N
D:
M E N U
00007A SV-623B-GB2 9/5/56 7:49 AM Page 18