GB
24
Recording a Programme with Automatic Stop
3
This function enables you to record up to nine hours (LP) of
programmes.
Your VCR stops automatically after the requested length of time.
1
Switch on the television.
2
To monitor the programme being recorded, select the television
channel reserved for use with your VCR (or the AV input if used).
3
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result:
The VCR is switched on automatically.
4
Select:
◆
The station to be recorded using the PROG (
or
)
buttons
or
◆
The AV1 or AV2 source using the INPUT button for a satellite
tuner or external video source
Result:
The channel number is displayed and the programme
can be seen on the television.
5
Select the recording speed by pressing the SPEED button as
many times as required (see page 21).
6
Hold the REC button ( ) down for a while to start recording.
Result:
The record indicator appears on the television screen
and VCR display. An index is recorded on the tape
(see page 35).
7
Press the REC button ( ) several times to increase the recording
time in:
◆
30-minute intervals up to four hours
◆
1-hour intervals up to nine hours (LP)
Result:
The length is displayed on the television displays. The
selected programme is recorded for the length of time
requested. At the end of that time, the VCR stops
recording automatically.
8
If you wish to cancel the recording before the end, press POWER.
☛
If the end of the tape is reached while recording:
◆
The recording stops
◆
The VCR automatically turns off
6
4
4
LENGTH 2:30
SET LENGTH :
PRESS
R E C
00007A SV-623B-GB2 9/5/56 7:49 AM Page 24
