GB
37
GB
36
The tape counter:
◆
Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
◆
Is reset when a cassette is inserted in the VCR
◆
Allows you to find the beginning of a sequence easily
☛
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1
Insert a cassette in your VCR.
2
To set the tape counter to zero at the beginning of a sequence:
◆
Press DISPLAY twice to display the counter
◆
Press CLR/RST when you want to set the tape counter to
zero
3
To fast-forward or rewind to the sequence at which the counter
was set to zero, simply press
or
.
Result:
The VCR stops automatically when the counter
reaches zero.
➢
Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 16).
Press DISPLAY:
◆
Once to display the current function, programme
number, recording speed, date, time and counter
◆
Twice to display the counter only
◆
Three times to display the time remaining on the
cassette
◆
Four times to clear the display
Using the Tape Counter
0 : 0 0 : 0 0
2
2
You can set interval repeat play to repeat the cassette several times
for special interval.
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
or
buttons, until the cursor is
placed in front of the
EASY OPERATION
option.
3
Press the
button to select this option.
Result:
The
EASY OPERATION
menu is displayed.
4
Press the corresponding
or
buttons, until the cursor is
placed in front of the
NO. OF INTERVAL REPEAT
option.
5
To...
Press , until...
Interval repeat play
5, 10, 15 is displayed.
(choose repeat time 5 times,
10 times, 15 times)
Cancel interval repeat play
O F F
is displayed.
6
On completion, press MENU twice to exit the menu.
7
To select interval during playback, press the INPUT/REPEAT
button at the desired start point.
Result:
“
INTERVAL REPEAT SETTING
” is displayed.
Press the INPUT/REPEAT button one more time at the desired
end point.
Result:
The tape is automatically rewound to the start point.
“
INTERVAL REPEAT
” is displayed.
Interval Repeat Play
1
2
3
2
You can set repeat play to repeat the tape continuously from
beginning to end.
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
or
buttons, until the cursor is
placed in front of the
EASY OPERATION
option.
3
Press the
button to select this option.
Result:
The
EASY OPERATION
menu is displayed.
4
Press the corresponding
or
buttons, until the cursor is
placed in front of the
REPEAT PLAY
option.
5
To...
Press
or , until...
Repeat play
O N
is displayed.
Do not wish to repeat play
O F F
is displayed.
6
On completion, press MENU twice to exit the menu.
Auto Repeat Play
* *M E N U * *
TIMER PROGRAMMING
USER SET
I N S T A L L A T I O N
CLOCK SET
EASY OPERATION
E N D :
M E N U
* *EASY OPERATION * *
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
E N
D:
M E N U
* *M E N U * *
TIMER PROGRAMMING
USER SET
I N S T A L L A T I O N
CLOCK SET
EASY OPERATION
E N D :
M E N U
* *EASY OPERATION * *
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
E N
D:
M E N U
00007A SV-623B-GB4 9/5/56 7:51 AM Page 36
