background image

GB

17

GB

16

Your VCR output channel may need to be changed if the pictures
suffer from interference or if your TV cannot find the pictures. 
Also, you can change the VCR output channel to adjust the
frequency in which information is displayed on the screen. 

1

Press MENU on the remote control.
Result:

The programming menu is displayed.

2

Press the corresponding 

$

,

or 

buttons to select the

INSTALLATION

option.

3

Press the OK button to select this option.
Result:

The 

INSTALLATION

menu is displayed.

4

Press the corresponding 

$

or

buttons, until the 

VCR OUTPUT

CH

option is selected.

5

Select the required output channel by pressing the 

or 

buttons.

6

On completion, press MENU twice to exit the menu. 
Then tune your television again (see page 14).

Setting the VCR Output Channel

INSTALLATION

PROG        OPTIONS     INSTALL

CLOCK       BONUS         LANG

  INSTALL

$

❷!!

➛❿!!

OK

END:

MENU

INSTALL  

AUTO SET UP
MANUAL SET UP

VCR OUTPUT CH :CH38

$

END:

MENU

Displaying/Hiding On-Screen Information

Choosing Your Language

You can change the language in which information is displayed on
the screen.

1

Press MENU on the remote control.
Result:

The programming menu is displayed.

2

Press the corresponding 

$

,

or 

buttons to select the

LANGUAGE SET

option.

3

Press the OK button to select this option.
Result:

The 

LANGUAGE SET

menu is displayed.

4

Select the required language by pressing the 

$

or

buttons.

5

Press OK to store the language selected. 

6

Press MENU to exit the menu.
Result:

From now on, all the on-screen information will be
displayed in the language selected.

USER SET

PROG        OPTIONS     INSTALL

CLOCK       BONUS         LANG

  OPTIONS   

$

❷!!

➛❿!!

OK

END:

MENU

Your VCR displays most information both on the VCR and the
television.
You can choose to display or hide this information on the television
screen (except for the Index, Programming MENU and G-CODE

(SV-640B/SV-245B only) function, which cannot be hidden).

1

Press MENU on the remote control.
Result:

The programming menu is displayed.

2

Press the corresponding 

$

,

or 

buttons to select the

USER SET

option.

3

Press the OK button to select this option.
Result:

The 

USER SET

menu is displayed.

4

Press the corresponding 

$

or

buttons, until the 

OSD

option is

selected.

5

To...

Press 

or

, until...

Display on-screen information

ON

is displayed.

Hide on-screen information

OFF

is displayed.

6

On completion, press MENU twice to exit the menu.

PTIONS  

OSD

:ON

TAPE SELECT

:E180

COLOUR SYSTEM   :AUTO
ECO. MODE       :OFF
IPC             :ON

$

END:

MENU

LANGUAGE SET

PROG        OPTIONS     INSTALL

CLOCK       BONUS         LANG

$

❷!!

➛❿!!

OK

END:

MENU

LANG      

  LANG

ENGLISH

DUTCH

DEUTSCH

SVENSKA

FRANÇAIS

MAGYAR

ITALIANO

POLSKI

ESPAÑOL

PORTUGUÊS

$

❷!!!!!!

➛❿

MEMORY:

OK

END:

MENU

LANGUAGE SET

01327A SV-641B/XSA-GB2  7/5/02 11:52 AM  Page 16

Summary of Contents for SV-641B


























Reviews: