background image

GB

35

34

Searching for a Specific Sequence

Each time you record a cassette on this VCR, an “index” is
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
direction selected, the indexes are numbered as follows:

etc.

Prev
Seq.

Seq. being

played

Next

Seq.

etc.

2

1

1

2

This VCR uses a standard indexing system (VISS). As a
result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.

INTRO SCAN

1

To search for a specific index, press INDEX.

2

Press the 

➛➛

or 

❿❿

buttons depending on the direction 

where your desired programme is located. 

3

When an Index mark is found the VCR will playback the tape for 5 
seconds, after which it will continue searching for the next Index
mark.

4

If you want to watch the tape from a particular Index, simply press

II

Index Skip Search: 
This feature will enable you to fast forward/rewind to a specific
point on a tape:  E.g. if you have recorded 3 different programmes
on a tape and you have rewound the tape to the beginning, by
using this feature you can go directly to the start of programme 2
simply by pressing the INDEX button. 

1

Press the INDEX to start the Index search. 

2

Press the 

➛➛

or 

❿❿

buttons twice more. This will take 

you directly to the start of the desired programme is located.   

3

These Index searches can be made forwards: (press 

❿❿

) or 

backwards: (press 

➛➛

). 

4

To cancel an Index search simply press the 

II or 

button. 

You can:

Stop the cassette at a given frame (image)

Advance one frame at a time

No sound is heard when playing back frame by frame.

1

Press:

ll to start playing the cassette

ll to stop the tape at a given frame

F.ADV (     ) to advance frame by frame

2

To return to normal playback, press 

ll.

When you have been using the Frame-by-Frame function
for more than about five minutes, the VCR will auto-
matically play to protect the cassette and video heads.

Vertical stability: When playing back frame by frame,
interference may be seen on the screen. Press the 
V-LOCK (

) buttons to minimize this effect.

Playing a Sequence Frame by Frame

Picture Search, Fast Forward/Rewind

F.ADV

Picture Search enables you to Fast Forward or Rewind and look for
a particular part of a tape. 

1

Press PLAY, the VCR will enter normal play mode. While in play,
press and release the 

❿❿

(or 

➛➛

) button. The VCR will search at 5

times the normal playback speed. 

2

To return to normal playback mode, press the 

II button. 

3

If you press and HOLD down the 

❿❿

(or 

➛➛

) button the VCR will

search at  9 times the normal speed. Releasing the  

❿❿

button will

return the VCR to search at 5 times the normal speed. To return to
normal playback mode, press the 

II button. 

4

Whilst in Picture Search mode, if you press the 

❿❿

button again,

the VCR will enter normal Fast Forward mode. 

5

Likewise, whilst in Picture Search 

➛➛

mode, if you press the 

➛➛

button again, the VCR will enter normal Rewind mode.  

6

If, when Redwing (

➛➛

) or Fast Forwarding (

❿❿

), you press the 

➛➛

(or 

❿❿

) button, the VCR will enter the Picture Search mode. 

TRK          PROG

REC

      MENU

1

V-LOCK

CLR/RST       F.ADV          INDEX

A.TRK                  IPC                INPUT

REPEAT

1

INDEX: 

➛➛!!!!!❿❿

INDEX SEARCH: 

❿❿!!!!

+01     

V-LOCK

Summary of Contents for SV-643B



























Reviews: