background image

To receive television programmes a signal must be received from
one of the following sources:

An outdoor aerial

An indoor aerial

A cable television network

A satellite receiver

Make sure that both the television and the VCR are
switched off before connecting the cables.

1

Remove the aerial or network input cable from the television.

2

Connect this cable to the 75

coaxial socket marked 

on the 

rear of your VCR.

3

Plug the coaxial cable supplied into the 

socket on your VCR.

4

Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.

5

Connect one end of the scart cable to the AV1 (EURO AV) socket
on the rear of the VCR. You must connect your VCR to the
television via the scart cable. 

6

Plug the other end into the appropriate connector on the
television.

TV

GB

Connecting Your VCR to the TV using the Coaxial
Cable and SCART cable

11

10

Deciding How to Connect Your VCR

TV

AV1 (EURO AV)

R/D

L/G

AUDIO

OUT/SORTIE

5

TV

AV2 (SATELLITE) IN

AV1 (EURO AV)

R/D

L/G

AUDIO

OUT/SORTIE

4

2

TV

TV

AV2 (SATELLITE) IN

AV1 (EURO AV)

R/D

L/G

AUDIO

OUT/SORTIE

3

You must take into account various factors when connecting audio or video systems:

Types of connectors available on your systems

Systems connected permanently to the VCR (satellite receiver for example) or temporarily
(camcorder for example)

Your VCR is equipped with the following connectors.

Connector

Location

Type

Direction

Recommended Use

AV1 (EURO AV) Rear

SCART

In/Out

Television

Satellite receiver

Other VCR

AV2 Rear

SCART

In

Satellite receiver 

(DEC./EXT.)

Other VCR

Audio output

Rear

Audio RCA

Out

Audio Hi-Fi system

OUT TO TV

Rear

75 

Out

Television 

coaxial

IN FROM ANT. Rear

75 

In

Aerial

coaxial

Cable television network

Satellite receiver

AUX

Front

Audio/Video RCA

In

Audio Hi-Fi system

Camcorder

(SV-645B Only)

Whenever you connect an audio or video system to your VCR, ensure that all elements are
switched off.

Refer to the documentation supplied with your equipment for detailed connection instructions
and associated safety precautions.

AUX

VIDEO      L - AUDIO - R   

TV

R/D

L/G

AUDIO

OUT/SORTIE

AV2 (DEC./EXT.)

AV1 (EURO AV)

Summary of Contents for SV-643B



























Reviews: