Samsung SV-647F Instruction Manual Download

Page: 14 / 29

Modifying ShowView Programming

If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press MENU a second time to confirm.

If you wish to...

Then...

Select an input source other

◆

Press the

➛

❿

buttons, until the

selection flashes.

than the tuner (AV1, AV2 or AUX)

◆

Press the ENTRÉE button one or more times to change the
input source selection.
Result:

The programme number is replaced by:

•

A1, A2 or AU for a satellite tuner or external
video input (used by another VCR for example)

➢

The input source must be selected before changing any
other value.

Record a programme every day

◆

Press the

➛

❿

buttons, until the

JOUR

selection flashes.

(Monday to Sunday) at the same time

◆

Press the

❷

buttons, until the

JOUR

(Daily) value is

displayed.

Record a programme every week

◆

Press the

➛

❿

buttons, until the

JOUR

selection flashes.

on the same day and at the same time

◆

Press the

❷

buttons, until the

S-

(Week) value is

displayed, followed by the required day.
Example:

S-SA

(Weekly Saturday)

Extend the recording time

◆

Press the

➛

❿

buttons, until the

FIN

selection flashes.

◆

Press the

❷

buttons to increase or decrease the stop

time.

Select the recording speed

◆

Press the

➛

❿

buttons, until the recording speed selection

flashes.

◆

Press the

❷

buttons until the correct indication is

displayed:

•

AUTO (Auto Tape Speed Select) : see page 26

•

STD (Standard Play)

•

DBL (Long Play)

Select VPS/PDC recording

◆

Press the

➛

❿

buttons, until the

V/P

selection flashes.

◆

Press the

❷

buttons until the “P” or “-” indication is

displayed.

☛

Do not select VPS/PDC unless you are sure the programme

you wish to record is broadcast with VPS/PDC. If you do set

VPS/PDC ON (by selecting “P” in the right - hand column

on the screen), then you must set up the start-time

EXACTLY according to the published TV schedule.

Otherwise the timer recording won’t take place.

Preset a programme title

◆

Press OK during the timer programming procedure or in the
timer programming screen.

◆

Press the

❷

buttons to select a character.

To move to the next or previous character, press the

➛

❿

buttons respectivly.

◆

If you wish to store the title, press OK.

Using the ShowView Feature

Before presetting your VCR:

◆

Switch on both the television and your VCR

◆

Check that the date and time are correct

◆

Insert the cassette on which the programme is to be
recorded (safety tab intact)

Up to six programmes can be preset.

Press the PROG. button.
Result:

The

OPTIONS PROG.

is displayed.

Press the corresponding

❷

buttons, until the

SHOWVIEW

option is selected.

Press the

❿!

button to select

SHOWVIEW

Result:

A message is displayed to allow you to enter the
ShowView code.

☛

If all six programmes have been set, the message

TOUS

LES PROGRAMMES SONT UTILISÉS

. is displayed. Refer

to page 27 if you wish to cancel a preset recording.

Press the numeric buttons to enter the code opposite the
programme that you wish to record in your television magazine.

➢

If you wish to correct the ShowView code that you are
entering:

◆

Press the

➛

button until the digit to be corrected is

cleared

◆

Enter the correct digit

Press the MENU button.
Result:

The information concerning the programme is displayed.

☛

When using the ShowView function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
pressing the

❷

buttons. Refer to the following page if:

◆

The programme number or times flash

◆

You wish to modify the programme

If the programme and times are correct, press the MENU button.

Press the M.A./VCR. button to activate the timer. If you wish to
turn the timer off any reason simply press the M.A./VCR. button
again.

Refer to page 27 if you wish to:

◆

Check that your VCR has been programmed correctly

◆