Connecting DHR(DVD HDD Recorder) to the TV using the Coaxial Cable
19
Deciding How to Connect DHR(DVD HDD Recorder)
18
You must take into account various factors when connecting audio or video systems:
◆
Types of connectors available on your systems
◆
Systems connected permanently to the
DHR (satellite receiver for example) or temporarily
(camcorder for example)
Your
DHR is equipped with the following connectors.
Connector
Location
Type
Direction
Recommended Use
AV1 (EURO AV) Rear
SCART
In/Out
◆
Television
AV2
Rear
SCART
In/Out
◆
Satellite receiver
◆
CANAL/DECODER
◆
Other VCR/DVD
Audio input
Rear
Audio RCA
In
◆
Audio in for S-VIDEO
S-VIDEO Rear
S-JACK
In
◆
S-Video in
input
Audio output
Rear
Audio RCA
Out
◆
LINE Audio out
VIDEO output
Rear
RCA
Out
◆
LINE Video out
S-VIDEO Rear
S-JACK
Out
◆
S-Video out
output
Digital AUDIO Rear
Optical
Out
◆
Digital Audio out
output
Coaxial
OUT TO TV
Rear
75
Ω
Out
◆
Television
Coaxial
IN FROM ANT. Rear
75
Ω
In
◆
Aerial
Coaxial
◆
Cable television network
◆
Satellite receiver
☛
Whenever you connect an audio or video system to your
DHR
,
ensure that all elements are switched off.
Refer to the documentation supplied with your equipment for detailed
connection instructions and associated safety precautions.
Connecting DHR(DVD HDD Recorder) to the TV using the SCART Cable
To receive television programs a signal must be received from one
of the following sources:
◆
An outdoor aerial
◆
An indoor aerial
◆
A cable television network
◆
A satellite receiver
➢
Make sure that both the television and the
DHR
are
switched off before connecting the cables.
1
Remove the aerial or network input cable from the television.
2
Connect this cable to the 75
Ω
coaxial jack marked
on the
rear of your
DHR
.
3
Plug the coaxial cable supplied into the
jack on your
DHR
.
4
Plug the other end of the coaxial cable into the connector
previously used for the aerial on the television.
5
To obtain better quality pictures and sound on your television, you
can also connect your
DHR
to the television via the SCART cable
(see section below) if your television is equipped with this type of
connection.
TV
You can connect your
DHR to the television using the SCART cable if the appropriate input is available
on the television. You thus:
◆
Obtain better quality sound and pictures
◆
Simplify the setting up procedure of your
DHR
➢
◆
Regardless of the type of connection chosen, you must always connect the coaxial cable
supplied. Otherwise, no picture will be visible on the screen when the
DHR
is switched off.
◆
Make sure that both the television and the
DHR
are switched off before connecting the cables.
1
Connect the coaxial cable as indicated in the above section.
2
Connect one end of the SCART cable to the AV1 (EURO AV) jack on the rear of the
DHR
.
3
Plug the other end into the appropriate connector on the television.
3
4
Aerial
SCART Cable
RF coaxial cable
2
3
TV
TV
2
