background image

13

12

Connecting Your VCR to the Satellite receiver or Other Equipment

You can connect your VCR to the Satellite receiver or other VCR using the SCART cable if the appropriate
outputs are available on the equipment chosen. The following illustrations give a few examples of the
connection possibilities. 

1. AV1(EURO AV): By means of 21-pin Scart Cable

Plug the SCART Cable with satellite receiver or other equipment into the AV1 (EURO AV) socket on the rear of the
VCR. 
After making this connection, select the source by pressing the INPUT button for the AV1 input sources. 

2. By means of RF Coaxial Cable

After making this connection, you must preset the station received through the satellite tuner. 
RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the VCR,
e.g. re-adjust to channel 33.

1. AV2 IN: By means of 21-pin Scart Cable

When the satellite receiver or other equipment is connected to the AV2 socket.

Plug the SCART Cable with satellite receiver or other equipment into the AV2 (DEC./EXT.) socket on the rear of the
VCR. 
After making this connection, select the source by pressing the INPUT button for the AV2 input sources. 
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner. 

Satellite Receiver or other Equipment

AV1 (EURO AV)

Antenne

Aerial Connector

2

TV

AV2 (DEC./EXT.)

AV1 (EURO AV)

R/D

L/G

AUDIO

OUT/SORTIE

SCART Cable

TV

1

Satellite Receiver or other Equipment

AV1 (EURO AV)

Antenne

Aerial Connector

2

TV

AV2 (DEC./EXT.)

AV1 (EURO AV)

R/D

L/G

AUDIO

OUT/SORTIE

SCART Cable

TV

1

SCART Cable

Connecting a Decoder for scrambled PAY TV broadcasts

This VCR is fully equipped to receive scrambled Pay TV broadcasts.
Example:

CANAL+ or Premiere broadcasts.

You can:

Record a scrambled programme while watching another channel

Record another channel while watching a scrambled programme

1

Connect the VCR to the television as indicated on page 11.

2

Plug the SCART cable with the decoder into the AV2 (DEC./EXT.) socket on the rear of the VCR.

3

Plug the other end into the decoder.

TV

AV2 (DEC./EXT.)

AV1 (EURO AV)

R/D

L/G

AUDIO

OUT/SORTIE

SCART Cable

SCART Cable

DECODER

Aerial

TV

Aerial Connector

AV1 (EURO AV)

3

2

GB

GB

02001A SV-L620K/DIN-GB1  6/19/03 11:55 AM  Page 12

Summary of Contents for SV-L30K


























Reviews: