19
18
Presetting the Stations Manually
☛
You do not need to preset the stations manually if you
have already set them automatically.
➢
To enable the VCR to decode a scrambled TV station, the
decoder must be switched on.
1
Press the MENU button on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
,
❷
or
➛
,
❿
buttons to select the
INSTALLATION
option.
3
Press the OK button to select this option.
Result:
The
INSTALLATION
menu is displayed.
4
Press the corresponding
or
❷
buttons, until the
MANUAL SET
UP
option is selected.
5
Press the
❿
button to select
MANUAL SET UP
option.
Result:
The
TV STATION TABLE
menu is displayed.
6
Press the
or
❷
buttons to select a programme number as
required.
7
Press the
❿
button to preset the station.
Result:
The
MANUAL TUNING
menu is displayed.
8
Press the corresponding
or
❷
buttons, until the CH is selected.
Press the
➛
or
❿
buttons to start scanning.
Result:
The frequency band is scanned and the first station
found is displayed.
If you know the number of the channel you want, press the
numeric buttons on the remote control for example, for channel
E21, first press “0” and then press “2”, “1” (see page 44).
9
If you...
Then...
Wish to store the
◆
Press the corresponding
or
❷
buttons,
station displayed
until the
MFT
is selected.
◆
Press the
➛
or
❿
buttons to adjust the
picture, if necessary.
◆
Press OK to store the station .
Do not wish to
◆
Press the corresponding
or
❷
buttons,
store the station
until the
CH
is selected.
displayed
◆
Press the
➛
or
❿
buttons to go on
scanning the frequency band and display
the next station
◆
Go back to the beginning of Step
9
10
Repeat this procedure from Step
6 onwards, until all the required
stations have been stored.
11
On completion, press the MENU button three times to exit the menu.
INSTALLATION
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALL
❷
➛❿
OK
END:
MENU
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM :K
VCR OUTPUT CH :CH36
❷
❿
END:
MENU
** TV STATION TABLE **
PR
CH
1
002
2
---
3
---
4
---
5
---
❷
❿
SWAPPING:
OK
DELETE:
CLR/RST MENU
** MANUAL TUNING **
PR
: 1
CH
: ---
MFT
: -
❷
➛❿
MEMORY:
OK
END:
MENU
Presetting the Stations Automatically
☛
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on
page 13).
Your VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can
be done:
◆
Plug & Auto Set up (see page 13)
◆
Automatically
◆
Manually (see page 19)
You can store up to 50 stations.
➢
To enable the VCR to decode a scrambled TV station, the
decoder must be activated after the scan (see pages 19).
1
Press the MENU button on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
,
❷
or
➛
,
❿
buttons to select the
INSTALLATION
option.
3
Press the OK button to select this option.
Result:
The
INSTALLATION
menu is displayed.
4
Press the corresponding
or
❷
buttons, until the
AUTO SET
UP
option is selected. And then press the
❿
button to select this
option.
5
Press OK to start the auto scanning.
Result:
◆
The
PLEASE WAIT
indication flashes on the
television screen.
◆
The first frequency band is scanned and the first
station found is displayed and stored.
◆
The VCR then searches for the second station and so on.
◆
When the automatic scanning procedure has
finished, the VCR switches automatically to pro-
gramme 1.
➢
The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
6
If you wish to cancel the auto scanning before the end, press the
MENU button three times to exit the menu.
➢
◆
Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 20).
AUTO SET UP
PLEASE WAIT
2
%
I--------------------I
END:
MENU
YOUR DATA WILL BE LOST
PRESS
OK
TO CONTINUE
MENU
TO EXIT
INSTALLATION
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALL
❷
➛❿
OK
END:
MENU
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM :K
VCR OUTPUT CH :CH36
❷
❿
END:
MENU
GB
GB
02004A SV-L625K/AFR-GB2 6/19/03 1:24 PM Page 18
