3
Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
4
Press the corresponding
or
❷
buttons, until the
AUTO SET UP option is selected. And then press
the
❿
button to select this option.
5
Press OK to start the auto scanning.
Result:
◆
The PLEASE WAIT indication flashes on
the television screen.
◆
The first frequency band is scanned and
the first station found is displayed and
stored.
◆
The VCR then searches for the second
station and so on.
◆
When the automatic scanning procedure
has finished, the VCR switches
automatically to programme 1.
➢
The number of stations automatically stored by the
VCR depends on the number of stations that it has
found.
6
If you wish to cancel the auto scanning before the
end, press the MENU button three times to exit the
menu.
➢
◆
Once the auto scanning procedure has finished,
some stations may have been stored more than
once; select the stations with the best reception
and delete the ones no longer required (see page
16).
Presetting the Stations
Automatically
❷
➛❿
OK
END:
MENU
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALL
INSTALLATION
Activating the DECODER:
1
Select the station using the PROG/TRK (
or
❷
).
2
Select the
INSTALLATION
option (see page
15).
3
Select the Manual Set up option.
4
Press the
or
❷
buttons to place the cursor
in front of the DECODER.
5
Press the
❿
button to activate use of
DECODER for the TV station.
6
Press OK to store the station.
7
Press Menu three times to exit menu.
ENG-14
You can choose the sound mode (B/G or D/K)
according to the TV set connected to your VCR.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
,
❷
or
➛
,
❿
buttons to
select the INSTALLATION option.
3
Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
4
Press the corresponding
or
❷
buttons, until the
TV SYSTEM option is selected.
5
Press the
❿
button to select K or G.
6
On completion, press MENU twice to exit the
menu.
Selecting the RF OUT Sound
Mode (B/G-D/K)
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM :K
VCR OUTPUT CH :CH36
❷
❿
END:
MENU
☛
You do not need to preset the stations if you have
already set them automatically (see Plug & Auto
Set Up on page 11).
Your VCR contains a built-in tuner used to receive
television broadcasts.
You must preset the stations received through the tuner.
This can be done:
◆
Plug & Auto Set up (see page 11)
◆
Automatically
◆
Manually (see page 15)
You can store up to 80 stations.
1
Press the MENU button on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
,
❷
or
➛
,
❿
buttons to
select the INSTALLATION option.
02129A SV-M620K/DIN-eng 4/21/04 1:56 PM Page 14
