ENG-15
☛
You do not need to preset the stations manually
if you have already set them automatically.
➢
To enable the VCR to decode a scrambled TV
station, the decoder must be switched on.
1
Press the MENU button on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
,
❷
or
➛
,
❿
buttons to
select the INSTALLATION option.
3
Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
4
Press the corresponding
or
❷
buttons, until the
MANUAL SET UP option is selected.
5
Press the
❿
button to select a MANUAL SET UP
option.
Result: The TV STATION TABLE menu is
displayed.
6
Press the
or
❷
buttons to select a programme
number as required.
Presetting the Stations Manually
7
Press the
❿
button to preset the station.
Result: The MANUAL TUNING menu is displayed.
8
Press the corresponding
or
❷
buttons, until the
CH is selected.
Press the
➛
or
❿
buttons to start scanning.
Result: The frequency band is scanned and the first
station found is displayed.
If you know the number of the channel you want,
press the numeric buttons on the remote control for
example, for channel E21, first press “0” and then
press “2”, “1” (see page 33).
9
Press the
❷
button, until the DECODER is selected.
10
Press the
❿
button to activate or deactivate use of the
decoder for the TV station, if necessary.
11
Press the
or
❷
buttons until the NAME is selected.
12
To change the programme’s name, press the
❿
button.
Result: The first letter of the name flashes.
13
To...
Then...
Select a character Press the
,
❷
button until the
in the name
required character is displayed
(letters, numbers or “-” character).
Move to the next or Press the
➛
or
❿
buttons
previous character respectively.
14
If you...
Then...
Wish to store the
◆
Press the corresponding
,
station displayed
❷
buttons, until the MFT is
selected.
◆
Press the
➛
or
❿
buttons to
adjust the picture, if necessary.
◆
Press OK to store the station
Do not wish to
◆
Press the corresponding
,
store the station
❷
buttons, until the CH is
displayed selected.
◆
Press the
➛
,
❿
buttons to
go on scanning the
frequency band and display
the next station
◆
Go back to the beginning of
Step 12
15
Repeat this procedure from Step 6 onwards, until
all the required stations have been stored.
16
On completion, press the MENU button three times
to exit the menu.
❷
❿
SWAPPING:
OK
DELETE:
CLR/RST
MENU
** MANUAL TUNING **
PR
: 1
CH
: ---
MFT
: -
DECODER : OFF
NAME
: ----
❷
➛❿
MEMORY:
OK
MENU
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM :K
VCR OUTPUT CH :CH36
❷
❿
END:
MENU
** TV STATION TABLE **
PR
CH
NAME
DEC
1
002
CAEB
OFF
2
---
----
OFF
3
---
----
OFF
4
---
----
OFF
5
---
----
OFF
02129A SV-M620K/DIN-eng 4/21/04 1:56 PM Page 15
