ENG-20
Cancelling a Preset Recording
Checking a Preset Recording
You can check your preset recordings:
◆
When you have finished presetting the VCR
◆
If you have forgotten which programmes will be
recorded
1
Insert the cassette. Press the TIMER button.
Press the
or
❷
buttons to select the
STANDARD option and then press the
❿
button or,
◆
Press MENU on the remote control.
Result: The programming menu is displayed.
◆
Press the OK button to select TIMER
PROGRAMMING option.
Result: The TIMER PROGRAMMING menu is
displayed.
2
Press the
or
❷
buttons to select the required
programme.
3
Press the
➛
or
❿
buttons to select and change
any values as required. For more details, refer to
the previous page.
4
On completion, press MENU twice.
You can cancel any programmes that are:
◆
Incorrect
◆
No longer required
1
Insert the cassette. Press the TIMER button.
Press the
or
❷
buttons to select the
STANDARD option and then press the
❿
button or,
◆
Press MENU on the remote control.
Result: The programming menu is displayed.
◆
Press the OK button to select TIMER
PROGRAMMING option.
Result: The TIMER PROGRAMMING menu is
displayed.
2
Select the programme to be cancelled by pressing
the
or
❷
buttons.
3
Press the CLR/RST button to cancel the selected
programme.
Result: All the recording information is deleted and
the broadcast will not be recorded.
4
On completion, press MENU twice.
11
Select the required recording end time by pressing
the
or
❷
buttons, following the same procedure
as when selecting the recording start time.
★
With SV-M620K/SV-M80K, you can select the
recording speed.
a. Press
❿
to select the the recording speed
(AUTO/SP/LP).
b. Press the
or
❷
buttons to switch between the
AUTO, SP (Standard Play) or LP (Long Play).
12
When you have finished, press the MENU button.
13
Press the VCR STANDBY/ON (STANDBY/ON)
button to activate the timer.
Result: Before starting recording, the VCR
compares the timer duration with the
remaining time on the cassette.
➢
Auto Tape Speed Select
★
(SV-M620K/SV-M80K
Only) The VCR’s “Auto Tape Speed Select”
function compares the duration of the timer
recording to the actual recording time remaining on
the tape loaded. If there is insufficient tape to
complete a timer recording in AUTO mode, the
VCR automatically switches to LP mode to record
the whole programme.
E.g.
If there is a one hour Timer Recording in
AUTO mode to be started, and only 40
minutes tape remaining, the VCR will
record in SP for 20 minutes and switch to
complete the remaining 40 minutes in LP
mode.
Using the Timer Programming
Feature
02129A SV-M620K/DIN-eng 4/21/04 1:56 PM Page 20
