ENG-9
ENG-8
Connecting Your VCR to the TV
using the RCA Cable
Connecting Other Equipment to
Your VCR
SV-M625K
Aerial
RF
coaxial cable
RF
coaxial cable
TV
LINE
IN 1
AUDIO
VIDEO
LINE
OUT
R
L
TV
2
You can connect your VCR to the television using the
RCA cable if the appropriate input is available on the
television. You thus:
◆
Obtain better quality sound and pictures
◆
Simplify the setting up procedure of your VCR
☛
◆
Regardless of the type of connection
chosen, you must always connect the
coaxial cable supplied. Otherwise, no
picture will be visible on the screen
when the VCR is switched off.
◆
Make sure that both the television and
the VCR are switched off before
connecting the cables.
1
Connect the coaxial cable as indicated in the above
section.
2
Connect one end of the RCA Audio/Video cable to
the Video output and Audio output socket on the
rear of the VCR.
3
Plug the other end into the appropriate connector
on the television.
You can connect other audio and/or video equipment
to your VCR in different ways. The following
illustrations give a few examples of the connection
possibilities.
Connecting Your VCR to the TV
using the Coaxial Cable
Display Indicator
To receive television programmes a signal must be
received from one of the following sources:
◆
An outdoor aerial
◆
An indoor aerial
◆
A cable television network
◆
A satellite receiver
☛
Make sure that both the television and the VCR
are switched off before connecting the cables.
1
Remove the aerial or network input cable from
the television.
2
Connect this cable to the 75
Ω
coaxial socket
marked
on the rear of your VCR.
3
Plug the coaxial cable supplied into the
socket
on your VCR.
4
Plug the other end of the coaxial cable into the
connector previously used for the aerial on the
television.
5
To obtain better quality pictures and sound on
your television, you can also connect your VCR
to the television via the RCA cable (see section
below) if your television is equipped with this
type of connection.
You have just purchased a SAMSUNG Video
Cassette Recorder (VCR). Together with your VCR,
you will find the following accessories in the box.
REMOTE CONTROL
OWNER’S INSTRUCTIONS
COAXIAL CABLE
Accessories
VIDEO
STEREO
1 2
3 4
5 6
1 Cassette loaded
indicator
2 PLAY indicator
3 Multi-function display
4 Timer indicator
5 STEREO indicator
★
(SV-M625K Only)
6 Rec indicator
TV
LINE
IN 1
DIO
EO
LINE
OUT
R
L
TV
TV
LINE
IN 1
AUDIO
VIDEO
LINE
OUT
R
L
3
4
Inserting Batteries in the Remote
Control
You must insert or replace the batteries in the remote
control when you:
◆
Purchase the video cassette recorder
◆
Find that the remote control is no longer
working correctly
1
Push the tab in the direction of the arrow to release
the battery compartment cover on the rear of the
remote control.
2
Insert two AA, R6 or equivalent batteries, taking
care to respect the polarities:
◆
+ on the battery with + on the remote control
◆
– on the battery with – on the remote control
3
Replace the cover by aligning it with the base of
the remote control and pushing it back into place.
➢
Do not mix different battery types (manganese
and alkaline for example).
2
➢
The RCA input/output connectors on the front
of the VCR are used for equipment, such as
camcorders, VCRs or sound systems.
LINE IN 2
VIDEO L AUDIO R
LINE
IN 1
LINE
OUT
Camcorder
VCR
Sound system
FRONT OF THE VCR REAR OF THE VCR
FRONT OF THE VCR REAR OF THE VCR
LINE IN 2
VIDEO AUDIO
LINE
IN 1
LINE
OUT
R
L
SV-M625K
SV-M85K/SV-M35K
SV-M85K/SV-M35K
TV
LINE
IN 1
AUDIO
VIDEO
LINE
OUT
TV
2
Aerial
