Samsung SV-M35K, Instruction Manual

ENG-15

ENG-14

You can rearrange the Station Table and give different

programme numbers to the stations listed according to

your own preferences.

1

Press the MENU button on the remote control.
Result: The programming menu is displayed.

2

Press the corresponding 

,

❷

or 

➛

, 

❿

buttons to 

select the INSTALLATION option. 

3

Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.

4

Press the corresponding 

or 

❷

buttons, until the

MANUAL SET UP option is selected. And then 
press the 

❿

button to select this option.

Result: The TV STATION TABLE menu is displayed.

5

Press the corresponding 

or 

❷

buttons, until the

required preset TV programme is selected.
Result: The selected station is displayed at the 

same time on the television screen.

6

To change the programme number assigned to a
station press the OK button on the remote control.
(For example, To move a TV station in programme
1 to programme 3) 

7

Press the 

or 

❷

buttons to select required

position. And then press OK again to swap the
position. 

8

You can modify this station by repeating the same
procedure from Step 5 onwards.

9

On completion, press the MENU button three times
to exit the menu.

If you have stored a TV station:

◆

That you do not require

◆

At the wrong programme position

you can cancel it.

1

Press the MENU button on the remote control.
Result: The programming menu is displayed.

2

Press the corresponding 

,

❷

or 

➛

, 

❿

buttons to 

select the INSTALLATION option. 

3

Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.

4

Press the corresponding 

or 

❷

buttons, until the

MANUAL SET UP option is selected.

5

Press the 

❿

button to select this option.

Result: The TV STATION TABLE menu is 

displayed.

6

Press the corresponding 

or 

❷

buttons, until the

required preset TV station (PR) is selected.

7

Press the CLR/RST button.

8

Repeat the same procedure from Step 6 onwards 
until all the required stations have been cleared.

9

On completion, press the MENU button three times 
to exit the menu. 

Clearing a Preset Station

Changing the Preset Station Table

☛  

You do not need to preset the stations manually if

you have already set them automatically.

➢ 

To enable the VCR to decode a scrambled TV
station, the decoder must be switched on.

1

Press the MENU button on the remote control.
Result: The programming menu is displayed.

2

Press the corresponding 

,

❷

or 

➛

, 

❿

buttons to 

select the INSTALLATION option. 

3

Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.

4

Press the corresponding 

or 

❷

buttons, until the 

MANUAL SET UP option is selected.

5

Press the 

❿

button to select MANUAL SET UP option. 

Result: The TV STATION TABLE menu is displayed.

6

Press the 

or 

❷

buttons to select a programme 

number as required.   

7

Press the 

❿

button to preset the station.

Result: The MANUAL TUNING menu is displayed.

Presetting the Stations Manually

8

Press the corresponding 

or 

❷

buttons, until the

CH is selected.
Press the 

➛

or 

❿

buttons to start scanning.

Result: The frequency band is scanned and the

first station found is displayed.

If you know the number of the channel you want, 
press the numeric buttons on the remote control for
example, for channel 04, first press “0” and then 
press “0”, “4” (see page 31).

9

If you...

Then...

Wish to store the

◆

Press the corresponding 

,

station displayed

❷

buttons, until the MFT is 

selected.

◆

Press the 

➛

or

❿

buttons to 

adjust the picture, if necessary.

◆

Press OK to store the station

Do not wish to 

◆

Press the corresponding 

,

store the station

❷

buttons, until the CH is 

displayed selected.

◆

Press the 

➛

or

❿

buttons to 

go on scanning the 
frequency band and display 

the next station

◆

Go back to the beginning of 

Step 9

10

Repeat this procedure from Step 6 onwards, until 
all the required stations have been stored.

11

On completion, press the MENU button three times 
to exit the menu.

  INSTALL    

AUTO SET UP

MANUAL SET UP

TV SYSTEM     :K
VCR OUTPUT CH :CH36

❷

❿

END:

MENU

❷

❿

SWAPPING: 

OK

DELETE: 

CLR/RST

MENU

** TV STATION TABLE **

PR

CH SYSTEM 

1

002

B/G/D/K

2

---

B/G/D/K

3

---

B/G/D/K

4

---

B/G/D/K

5

---

B/G/D/K

** MANUAL TUNING **

PR

: 1

CH

: ---

SYSTEM

: -

MFT

: -

❷

➛❿

MEMORY: 

OK

MENU

❷

SWAPPING: 

OK

MENU

** TV STATION TABLE **

PR

CH SYSTEM 

1

002

B/G/D/K

2

---

B/G/D/K

3

---

B/G/D/K

4

---

B/G/D/K

5

---

B/G/D/K

❷

SWAPPING: 

OK

MENU

** TV STATION TABLE **

PR

CH SYSTEM 

1

---

B/G/D/K

2

---

B/G/D/K

3

002

B/G/D/K

4

---

B/G/D/K

5

---

B/G/D/K