Samsung SVMi-20i User Manual Download

Page: 150 / 247

Error! Style not defined.

150

(Continued)

Item

Description

Label Name

This format (‘lastname, firstname’ vs. ‘firstname lastname’) is

important because the directory feature will search on a specific

field, ‘lastname’ or ‘firstname’. If you did not put a comma after

the ‘lastname’ in the ‘lastname, firstname’ format or put a comma

after ‘firstname’ in the ‘firstname lastname’ format, the directory

search would not be accurate and subscribers entered out of

format could not be accessed from the Directory.

Number

The number that must be entered by the caller in order to access

the subscriber extension. It does not necessarily have to be the

same number dialed by the SVMi-20i when transferring to the

extension.

This cannot be the same number of any other extension, and is

also referred to as the ‘Key’ Value.

Mailbox

The mailbox corresponding to the subscriber Extension block.

Entering a Mailbox block here indicates that this extension owns

the specified mailbox.

EClass

The name of the EClass block that contains the class of service

information for this Extension. Much of the prompts, control, and

parameters are located here. See the EClass block for detailed

information and operation.

Language

This is a language option. You may select from any installed

language and from that point on, the extension will respond to

the authorized owner in the language selected. Authorized owner

means a user who has entered a valid password. The mailbox

block also has a language field, and the SVMi-20i will try to

resolve these fields so that they are identical. If conflicting

information is contained in these fields, the Extension block has

priority and the Mailbox block will be automatically changed to

match. This selection is based on the order of the defined

languages in the System Wide Parameters described earlier.

If the languages are to be reordered, added to, or changed, then

this field should be re-entered.

Summary of Contents for SVMi-20i
























































































































































































































































Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands

Samsung SVMi-20i, User Manual

Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands