Samsung SVMi-20i User Manual Download

Page: 153 / 247

SVMi-20i User Guide

153

(Continued)

Item

Description

Supervision

Level

- CONFIRM: This level not only performs an Announced

Supervision but also now allows the subscriber the option of

accepting, redirecting, rejecting, or recording a real time

greeting for the call. If the call is rejected, it is considered to be

a ‘blocked’ call condition. The call transfer is aborted, pulling

the call back and follows the extension block’s ‘blocked’ call

condition rules. This can be to play the subscriber’s blocked

Greeting if recorded, to play Primary Greeting if recorded, or to

be directed to the Call Director to ask where to send the call for

that call condition.

This level of supervision is automatically used in ‘Designated

location’, ‘Follow Me’, and ‘Find Me’ applications or whenever

the Alternate Number Field is used.

- SCREEN: The system requests the name of the caller, rings

the subscriber and announces who is calling. The subscriber

has the option of accepting, redirecting, rejecting, or recording

a real time greeting for the call.

If the call is rejected, it is considered to be a ‘blocked’ call

condition.

The call transfer is aborted, pulling the call back and follows the

extension block’s ‘blocked’ call condition rules. This can be to

play the subscriber’s blocked Greeting if recorded, to play

Primary Greeting if recorded, or to be directed to the Call

Director to ask where to send the call for that call condition.

Subscriber

Password

The digits that the extension user enters to gain access to the

extension user menu. In the SVMi-20i, subscribers usually have

both an Extension block and a Mailbox block (but may have only

one of them). Since each of these blocks have a password

option, if different password values are entered in each of these

blocks (extension and mailbox), the SVMi-20i will try to resolve

these two password fields into one value. The extension

password will override the value in the mailbox field. Valid entries

for this field are ‘NONE’ in which case no password is set and

‘DEFAULT’ in which case password will be set to the default

which is 0000. This field will not display the subscriber’s

password.

Account code

Entered if the subscriber has an access code used for long

distance access. This access code can be inserted in any dial

string using ‘$A’.

Summary of Contents for SVMi-20i
























































































































































































































































Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands

Samsung SVMi-20i, User Manual

Search results

Summary of Contents for SVMi-20i

Reviews:

Related manuals for SVMi-20i

Brands by name

Popular brands