manualshive.com logo in svg

Samsung SVMi-20i, User Manual

The Samsung SVMi-20i user manual is available for free download at 88.208.23.73:8080. This comprehensive manual provides step-by-step instructions, troubleshooting tips, and valuable insights into the features of the SVMi-20i phone system. Empower yourself with this essential manual to fully maximize your Samsung SVMi-20i experience.

Share
Download
background image

Error! Style not defined.

 

242

 

© SAMSUNG Electronics Co., Ltd. 

RSA Data Security, Inc. makes no representations concerning either the merchantability of this software or the 
suitability of this software for any particular purpose. It is provided “as is” without express or implied warranty of 
any kind. 
 
These notices must be retained in any copies of any part of this documentation and/or software. 
 

The MIT License 

Copyright (C) <year> <copyright holders> 
 
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated 
documentation files (the “Software”), to deal in the Software without restriction, including without limitation the 
rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to 
permit persons to whom the Software is furnished to do so, subject to the following conditions: 
 
The above copyright notice and this permission notice shall be included in all copies or substantial portions of 
the Software. 
 
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, 
INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A 
PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR 
COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN 
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH 
THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. 
 

Tiff License 

Copyright (C) 1988-1997 Sam Leffler 
Copyright (C) 1991-1997 Silicon Graphics, Inc. 
 
Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is 
hereby granted without fee, provided that (i) the above copyright notices and this permission notice appear in all 
copies of the software and related documentation, and (ii) the names of Sam Leffler and Silicon Graphics may 
not be used in any advertising or publicity relating to the software without the specific, prior written permission of 
Sam Leffler and Silicon Graphics. 
 
THE SOFTWARE IS PROVIDED “AS-IS” AND WITHOUT WARRANTY OF ANY KIND, EXPRESS, IMPLIED 
OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE. 
 
IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, 
INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR ANY DAMAGES WHATSOEVER 
RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER OR NOT ADVISED OF THE 
POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF LIABILITY, ARISING OUT OF OR IN CONNECTION 
WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 
 

LICENSE ISSUES 

================== 
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the 
original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are 
BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-
core@openssl.org. 
 

OpenSSL License 

=================== 
Copyright (C) 1998-2008 The OpenSSL Project. All rights reserved. 
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the 
following conditions are met: 
 
1.    Redistributions of source code must retain the above copyright notice, this list of conditions and the 

following disclaimer. 

2.    Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the 

following disclaimer in the documentation and/or other materials provided with the distribution. 

3.    All advertising materials mentioning features or use of this software must display the following 

acknowledgment: 

“This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. 
(http://www.openssl.org/)” 

4.    The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products 

derived from this software without prior written permission. For written permission, please contact openssl-
core@openssl.org. 

5.    Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their 

names without prior written permission of the OpenSSL Project. 

6.    Redistributions of any form whatsoever must retain the following acknowledgment: 

“This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit 
(http://www.openssl.org/)” 

Summary of Contents for SVMi-20i
























































































































































































































































Reviews:

No comments

Related manuals for SVMi-20i

Ubiquiti NanoBeam M5 Setup preview
NanoBeam M5
Brand: Ubiquiti Pages: 3
WaiLan DeltaFire 500 User Manual preview
DeltaFire 500
Brand: WaiLan Pages: 27
Ravpower RD-WD009 User Manual preview
RD-WD009
Brand: Ravpower Pages: 27
LevelOne FSW-0808TX Quick Start Manual preview
FSW-0808TX
Brand: LevelOne Pages: 3
SafeHome NVR903 Manual preview
NVR903
Brand: SafeHome Pages: 24
Planet GSW-2416SF User Manual preview
GSW-2416SF
Brand: Planet Pages: 54
Airvana ipBTS C30 Installation And Commissioning Manual preview
ipBTS C30
Brand: Airvana Pages: 90
ExtraHop EDA 4200 Install preview
EDA 4200
Brand: ExtraHop Pages: 2
ZyXEL Communications NBG6616 Quick Start Manual preview
NBG6616
Brand: ZyXEL Communications Pages: 4
Ruckus Wireless SmartZone 3.2 Quick Setup Manual preview
SmartZone 3.2
Brand: Ruckus Wireless Pages: 4
H3C SecPath L5030 Installation Manual preview
SecPath L5030
Brand: H3C Pages: 62
Radio Shack TRS-80 PTC-64 Operation Manual preview
TRS-80 PTC-64
Brand: Radio Shack Pages: 40
H3C SecPath F5010 Installation, Quick Start preview
SecPath F5010
Brand: H3C Pages: 2
Siklu EtherHaul 500 Installation Manual preview
EtherHaul 500
Brand: Siklu Pages: 52
ADTRAN 1181413L2 Installation And Maintenance Manual preview
1181413L2
Brand: ADTRAN Pages: 100
B&B Electronics ESR901 User Manual preview
ESR901
Brand: B&B Electronics Pages: 90
C-Data FD612H User Manual preview
FD612H
Brand: C-Data Pages: 19
NetApp SG1000 Troubleshooting Installations preview
SG1000
Brand: NetApp Pages: 10

Brands by name

Popular brands

Load more brands