¥ No draining. (With PUMP MODEL)
7-4-4 Inspection After Repair
Inspection Item
Description
Check grounding
Check that the original grounding wire of the washing machine is securely grounded.
Connection of the grounding wire? wire to a gas or water pipe made of vinyl
chloride is very dangerous.
Check the safety
Check the operation of the brake. If the following braking times are exceeded,
system
readjust or repair the brake system.
Dressing the lead wires
Tie the lead wires with a separate wire to prevent them from scattering.
Check that they are securely connected.
Check the locking nuts and screws
Check that the nuts and screws are securely locked, and be sure to apply
screw lock.
Check inside the washing machine
Check for any vinyl wires, screws, or foreign materials inside the
washing machine.
Check for oil (lubricant) or
In particular, check the surrounding areas of driving units for oil (lubricant)
water leakage
leakage, and check the moving parts of the drain valve for water leakage.
Checking the connection of the
Check the power cord, plug, and receptacle for any damage. Make sure they
power cord
comply with the working voltage.
Adjustment of horizontal level
Adjust the height of the two adjusting legs (front of the washing machine) so that
of the washing machine
the washing machine is horizontally level.
Load
Braking Time
No load
Below 7 seconds
Rated load (5.0/5.5kg)
Below 10 seconds
SAMSUNG ELECTRONICS CO., LTD
7-11
7. Troubleshooting
NO
NO
NO
YES
YES
No draining.
Is there any
operating sound of
Pump - Drain?
Does the motor
drain operate?
Connect it firmly.
Fault on PCB assembly.
Relace it.
Fault on Pump - Drain.
Replace it.
Is the wire connection
of pump OK?
YES
Remove the foreign matercal
from the Filter - Case.
