4-3-1 Water Supply
1. In all the cases of prior to the first press of START/HOLD
key, during operating or hold state, they follow the below
sequences.
2. When wool course is selected, water supply is selected
automatically to cold water without key input.
3. Once water supply is changed by key input, this water
supply keeps on the changed course.
In case of wool course, cold water is selected automatically,
but if the user'd like to change it to other course, the course
will return to the previous course.
4. While water supplying, the lamp selected is flashing(one
second ON/OFF)
4-3-2 Water Level
1. In all the cases of prior to the first press of START/HOLD
key, during operating or hold state, they follow the below
sequences.
2. When WOOL is selected, only HIGH & MEDIUM water
level is possible.
3. If you change the course to WOOL, in case previous water
level is low or medium, the water level is automatically
selected High level and in case previous water level is over
Low, the water level is not changed.
4. While water is supplying, if the water level is changed, the
remaining time is changed.
4-3-3 Course
1. If this key is pressed before the first press of START/HOLD
key or during HOLD state, the selection order is as follow.
Even if manual washing is selected already, the selected
course is cancelled, and the course is selected as follow.
2. During operating, all keys except for COURSE SELECTION
key are valid.
But, only START/HOLD is vaild during spin operation.
3. During operating, If anykey is pressed after pressing the
START/HOLD key, new Selection course is performed, not
related to previous course.
4. This key is invalid during operation.
4-3-4 Function Button
1. This key is valid except for weight sensing operation.
2. After START/HOLD during operation or under reset
condition, as pressing this key display is changing as
follows.
3. The beginning conditions are as follows when function key
is selected.
4. This key is used as adjusting function.
①
Rinsing times are added by one time when function
key is pressed under general course operation
(FUZZY, SOAK, WOOL and SPEEDY) and
function operation (RINSE, WASH+RINSE,
RINSE+SPIN, WASH+RINSE+SPIN) as pressing
this key.
Display is changing as follows.
➁
Washing time is adjusted by press of function
key during washing only operation.
③
Spinning time is adjusted by press of function key
during spinning only operation.
4-3-6 Start/Hold
1. Available only after selecting a course.
2. Sequence :
3. The display shows the remaining time, including the current
function, when in 'start' status.
The time decreases 1-min at a time.
When in 'Hold' status, the time stays as it is.
4-3-7 Power
1) This key is always available when the power cord is
connected.
2) sequence :
3) After finishing operation, this key is automatically turned
off.
4-3 Function Descriptions
SAMSUNG ELECTRONICS CO., LTD
4-3
4. Operating Instructions
→
FUZZY
→
SOAK
→
WOOL
→
SPEEDY
→
COLD
→
COLD +HOT
→
HOT
→
HIGH
→
MEDIUM
→
LOW
→
EXTRA LOW
FUNCTION
WASH
RINSE
SPIN
WASH+RINSE
RINSE+SPIN
WASH+RINSE+SPIN
TIME
23 min
15 min
9 min
43 min
24 min
52 min
→
2 (times)
→
3
→
4
→
5
→
1
→
START
→
HOLD
→
START
→
ON
→
OFF
→
ON
→
WASH
→
RINSE
→
SPIN
→
WASH+RINSE
→
RINSE+SPIN
→
WASH+RINSE+SPIN
→
20 (min)
→
21
→
23
→
25
→
3
→
5
→
7
→
9
•••
→
17
→
19
→
7 (min)
→
1
→
2
→
•••
→
6
