background image

 

- 3 -

 

SAFETY INSTRUCTIONS

 

Please note that the following precautions for safety intend to prevent 
unpredictable danger and damage by helping the proper use in safety.
When using hot water in washing, please make sure that the water should not 
exceed 50

 

°

 

C.

 

 

Plastic parts may be deformed or damaged, and an electric shock or a fire 
may take place.

 

WARNING

 

There might be serious injury or fatal accident when you violate this 
instruction.

 

 

If the plug (power supply cord) is damaged, it mustbe replaced by the man-
ufacturer or its service agent or a similarly qualified person in order to avoid 
a hazard.

 

 

Do not pull the cord off or touch it with moist hands.

 

− 

 

An electric shock or a fire may take place.

 

 

Do not bend the power supply cord by force or press it with heavy hings.

 

− 

 

An electric shock or a fire may take place.

 

 

Do not install the washer nearby electric implement or don't put a candle 
light or cigarette light on the washer.

 

− 

 

A fire may take place.

 

 

During operation, do not put your hands or metal materials under the 
washer.

 

− 

 

You may be hurt by spinning board beneath the washer.

 

 

Stay away from the washer when the bottom of the washer sinks into the 
water.

 

− 

 

There might be an electric shock. Please wait until the water drains out 

completely.

 

 

Do not put laundry stained with gasoline, benzene, or alcohol in the washer, 
and keep the materials away from the washer.

 

− 

 

An explosion or a fire may take place.

 

 

During spinning, don’t put your hand in the spinning tub.

 

− 

 

It may hurt your hands. If it does not stop within 15 seconds after you 
open the lid, call service agent immediately.

 

 

 This appliance is not intended for use by young children or infirm persons 
unless they have been adequately supervised by a responsible person to 
ensure that they can use the appliance safely.
Young children should be supervised to ensure that they do not play with 
the appliance.

 

 

This appliance has to be connected to the plug endurable to proper power 
consumption.

 

 

This appliance has to be positioned so that the plug is accessible after 
installation.

 

 

No user-serviceable parts inside. Refer any servicing to qualified service 
personnel.

 

− 

 

Otherwise this may cause a mechanical error, electric shock, fire or phys- 
ical damage.

 

− 

 

The product warranty does not cover problems resulting from disassem- 

bling the product.

 

 

Do not use this product for business purposes.

 

 

For washing machines with ventilation openings in the base, that a carpet 
must not obstruct the openings.

 

CAUTIONS

 

There might be a slight injury or damage when you violate this 
instruction.

 

 

Don’t install it in the area with moisture or outdoor where it has rain or snow.

 

− 

 

An electric shock or a fire may take place.

 

 

Please unplug the power supply cord when you do not use it.

 

− 

 

An electric shock or a fire may take place.

 

 

If there is dust or water on the power supply plug and its connected part, 
please remove it completely.

 

− 

 

An electric shock or a fire may take place.

 

 

Do not make your kids look into the inside of the washer.

 

− 

 

If your kid falls into the washer, his life could be in danger.

 

 

Ventilate immediately without touching the power plug if gas is leaking.

 

− 

 

An electric shock or a fire may take place if it catches flame.

 

 

If the washer makes strange noise, smell or smoke, unplug it promptly and 
call service agent.

 

− 

 

An electric shock or a fire may take place.

 

 

When cleaning, don’t spray water to the parts of the washer directly.

 

− 

 

It may make it’S life span shorten.
Also an electric shock or fire may take place.

 

 

Don’t use several appliances together with an outlet.

 

− 

 

A fire may take place due to unusual heat.

 

 

Don’t press the button with an awl or pin.

 

− 

 

An electric shock or a fire may take place.

 

 

Use the new hose-sets and old hose-sets should not be reused.

 

 

If the damage is found on the current cord in use, it should be replaced by 
manufacturer, service cener or authorized person in order to avoid the risk.

 

 

Connect the grounding wire to the shell plate, and bury it under at least 
25cm of earth:elternatively, connect the ground wire to the appropriate pin 
on a properly grounded power receptacle. Never connect the wire to a tele-
phone line, lightning rod, or gas pipe.

“CAUTION: If this appliance is supplied from a cord extension set or electrical 

portable outlet device, the cord extension set or electrical portable 
outlet device must be positioned so that it is not subject to splash-
ing or ingress of moisture.”

SW85ASP-01976C-GB Page 3 Monday, August 14, 2006 6:32 PM

Summary of Contents for SW82ASP















Reviews: