Using PEAP-MSCHAP V2 Security
To use PEAP-MSCHAP V2 security In the MagicLan Utility, access the
Security tab
in the
Profile Management window.
1. On the Security tab, choose the WPA radio button.
OR: On the Security tab, choose the 802.1x radio button.
2. Choose PEAP (EAP-MSCHAP V2) from the drop-down menu.
To use PEAP (EAP-MSCHAP V2) security
, the server must have PEAP certificates, and the
server properties must already be set. Check with the IT manager.
1. Click the
Configure
button.
2. Select the appropriate certificate from the drop-down list.
3. Specify a user name for inner PEAP tunnel authentication:
o
Enter a PEAP user name in the User Name field to use a
separate user name and start the PEAP authentication process.
4. Click
Advanced
and:
o
Leave the server name field blank for the client to accept a
certificate from any server with a certificate signed by the
authority listed in the Network Certificate Authority drop-down
list.
(recommended)
o
Enter the domain name of the server from which the client will
accept a certificate.
o
The login name used for PEAP tunnel authentication, fills in
automatically as PEAP-
xxxxxxxxxxxx
, where
xxxxxxxxxxxx
is
the computer's MAC address. Change the login name if
needed.
5. Click
OK
.
6. Enable the profile.
Summary of Contents for SWL-2460C
Page 1: ...SWL 2460C User s Guide SAMSUNG 2 4GHz Wireless LAN Networking Soultions ...
Page 21: ......
Page 22: ......