English 6
Setting up Your LCD Monitor
Plug and Play
The adoption of the new
VESA
®
Plug and Play solution eliminates complicated and time con-
suming setup. It allows you to install your monitor in a Plug and Play compatible system with-
out the usual hassles and confusion. Your PC system can easily identify and configure itself
for use with your display. This monitor automatically tells the PC system its Extended Display
Identification Data (EDID) using Display Data Channel (DDC) protocols so the PC system can
automatically configure itself to use the flat panel display. If your PC system needs a video
driver, follow the instructions given below according to the operating system your computer
uses.
Installing the Video Driver
The CD that accompanies this product contains the necessary drivers for installing your mon-
itor. Please refer to the driver installation instructions included with your CD package for more
information.
Self-Test Feature Check (STFC)
Your monitor provides a self-test feature that allows you to check whether your monitor is function-
ing properly. Make sure that PC is selected as a primary source by checking if the source indicator
LED labeled “PC” is on. If your monitor and computer are properly connected but the monitor screen
remains dark and the power indicator is blinking, run the monitor self-test by following the steps
given below:
Figure 4. Power Indicator
1
Turn off both your computer and the monitor.
2
Unplug the video cable from the back of the computer.
3
Turn on the monitor.
Power Indicator
