OSD Functions
4. Channel Control
The channel change function is available only in TV mode or when the PIP feature is ON in
PC mode and the PIP source is set to TV.
(You can change the channel in PC mode when the
PIP feature is ON. )
For detailed information on Screen Adjustment in the Channel Control, refer to
the Channel Control
Adjustment Animation Clips
.
OSD
Description
Air/CATV
The channel system can be set in several different ways.
• Air
• STD
• HRC
• IRC
STD, HRC, IRC and Air identify various types of cable TV systems.
Contact your local cable company to identify the type of cable system that exists in your
particular area.
Auto
Program
The TV automatically cycles through all of the available channels and stores them in
memory. This takes about one to two minutes.
In rare cases, "Auto program" may miss a few channels due to weak signals and the
channels may not be added to the channel memory.
Add/Delete
Adds or erases channels from the memory.
Fine Tune
Due to weak signals or an incorrect antenna configuration, some of the channels may not be
tuned correctly.
Summary of Contents for SyncMaster 173MW
Page 1: ...SyncMaster 173MW...
