background image

1-3

Major Safety Precautions

 Caution

Installation Related 

 Warning

Avoid unplugging the power plug while the 
product is operating.

Otherwise, it may damage the product due 
to electric shock.

Make sure to use only the power cord supplied 
by our company. In addition, do not use the 
power cord of another electric appliance. 

Otherwise, it may result in electric shock or 
fire. 

When unplugging the power plug from the wall 
outlet, make sure to hold it by the plug and not 
by the cord. 

Otherwise, it may result in electric shock or 
fire. 

Connect the power plug to a wall outlet that can 
be easily reached. 

When a problem occurs with the product, 
you must unplug the power plug to cut the 
power off completely. You cannot cut the 
power off completely using only the power 
button on the product. 

Avoid placing burning candles,  mosquito-
repellent or cigarettes on the product and 
installing the product near a heater. 

Otherwise, it may result in fire.

Ask an installation engineer or relevant 
company to install the product onto the wall.

Otherwise, it may result in injury. 

Make sure to use the specified wall mount.

Avoid installing the product in a badly-ventilated 
location such as inside a bookshelf or closet.

Otherwise, it may result in fire due to 
internal over-heating.

Keep a distance of at least 10 cm from the wall 
when installing the product for ventilation.

Otherwise, it may result in fire due to 
internal over-heating.

Keep the plastic bags used to pack the product 
away from children.

 If children place the plastic bags over their 
heads, they may suffocate.

Avoid installing the product in a location that is 
unstable or exposed to excessive vibrations 
such as on an unstable or slanted shelf.

The product may fall and this may result in 
damage to the product or injury.

If you use the product in a location exposed 
to excessive vibrations, it may result in a 
problem with the product or fire.

Avoid installing the product in a location 
exposed to dust, moisture (sauna), oil, smoke 
or water (rain drops) and installing it within a 
vehicle. 

This may result in electric shock or fire.

Avoid installing the product in a location 
exposed to direct sunlight and installing the 
product near a heat source such as a fire or 
heater.

This may shorten the product life cycle or 
cause fire.

Avoid installing the product at an easily 
reachable height where children may reach it.

If a child touches the product, the product 
may fall and this may result in injury. 

Since the front part is heavier, install the 
product on a flat and stable surface. 

 

 

Summary of Contents for SyncMaster XL2270












































Reviews: