1.
Connect the
[DIGITAL AUDIO OUT (OPTICAL)]
terminal of your monitor to the digital sound
input terminal of your digital amplifier using an optical cable.
2.
Set the Internal Mute On in the Sound menu using the MENU button.
3.
Adjust the sound volume using the Volume button of your amplifier
4.
If the connections are set up, power up your monitor and amplifier.
Note
•
Because no sound is emitted from the monitor, you need to use an amplifier.
•
For information on how to connect a speaker and amplifier, refer to the respective user manuals
provided by their manufacturers.
Connecting COMMON INTERFACE
Note
You can install the CAM anytime whether the TV is ON or OFF.
Purchase the CI CAM module by visiting your nearest dealer or by phone.
1.
Insert the CI CARD into the CAM in the direction of the arrow until it fits.
2.
Insert the CAM with the CI CARD installed into the common interface slot.
(Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the
slot.)
3.
Check if you can see a picture on a scrambled signal channel.
Connections
