English - 12
05 Running the Initial Setup
When you turn on your TV for the first time, it immediately starts the Initial Setup. The Initial Setup allows you
to configure the basic settings for the TV to operate, such as broadcast reception, channel search, and network
connection, at one time.
•
Before starting the Initial Setup, be sure to connect external devices first.
•
To use the TV's smart features, the TV must be connected to the Internet.
•
To perform Initial Setup using the SmartThings app, you must connect your mobile device via Wi-Fi.
•
If the pop-up for setup does not appear automatically in the SmartThings app on your mobile device,
continue setup manually after adding the TV using
Add Device
on the dashboard of the SmartThings app.
•
The SmartThings app is available for mobile devices running Android 6.0 or higher or iOS 10 or higher.
•
Noise may occur temporarily when the TV communicates with mobile devices.
You can also start the Initial Setup using the TV's menu (
>
Settings
>
General
>
Reset
).
Follow the instructions displayed on the Initial Setup screen and configure the TV's basic settings to suit your
viewing environment.
Using the TV Controller
You can turn on the TV with the
TV Controller
button on the lower-left corner of the back of the TV, and then
use the
Control menu
. The
Control menu
appears when the
TV Controller
button is pressed while the TV is On.
For more information about its usage, refer to the figure below.
To run an item on the menu, move the
TV Controller
button up, down, left, or right to move the focus to it, and
then press the
TV Controller
button.
Control menu
:Smart Hub
:Source
:Settings
:Power off
:Return
•
Press: Display the
Control menu
. Select or run a focused
item on the menu.
•
Press and hold: The running function is terminated.
•
Up/Down button: Changes the channel.
•
Left/Right button: Changes the volume.
The
TV Controller
button is located on the lower-left corner of
the back of the TV.
TV Controller
button
Remote control sensor / Sound sensor
