English - 20
Charging the Battery
If the red LED blinks every 2 seconds, charge the battery as shown below. The orange
LED will blink every second when battery charging is in progress. The green LED will
blink every 2 seconds when the charging is finished. (It takes about 30 minutes to fully
charge the battery that is dead; however, the time required to charge it to full capacity
may vary depending on the battery level and the voltage of the supplied power.)
USB PORT
PC
Note Book
SAMSUNG TV
Micro USB Cable
Performing 3D Active Glasses pairing
What is Pairing?
Pairing is a process that prepares
devices to exchange data so that, in operation, the
devices can transmit and exchange data instantly.
•
Pairing
: Press the pairing button on the 3D
glasses for more than 1 seconds. Pairing will
start.
✎
It might take 10 ~15 seconds to reconnect
the glasses. There is no power off button on
these glasses.
•
Powering on / off the 3D glasses
: Put on the 3D glasses. The glasses will
automatically power on and the green LED will be lit for 3 seconds. To power off the
glasses, take off the glasses. Several minutes later, the glasses will automatically
power off and the red LED will be lit for 3 seconds. (Make sure that 3D is activated
on the TV before using the 3D glasses.)
•
Operating range
Recommended pairing distance
Recommended viewing distance
50 cm
2~6 m
Recommended viewing distance
2~6m
Recommended pairing distance
50 cm or less
✎
The working distance depends on obstacles (a person, metal, walls, etc.) or
electromagnetic waves.
✎
Note that if you take off the 3D glasses while viewing 3D video and the 3D mode
remains enabled on your TV, it will take 5 minutes for the 3D glasses to power off.
✎
If the glasses do not operate immediately when you put them on while the TV is in
3D mode, put the glasses on again.
✎
This product is rechargeable. It may not operate due to the dead battery when
you attempt to use it for the first time. In this case, charge the battery.
[UHDS9-XN-ZF]BN68-05272E-03L04.indb 20
2013-10-31 1:55:51
