Shooting options
42
Shooting in the dark
Adjusting the amount of flash
Adjust the amount of flash to avoid overexposure or
underexposure.
In Shooting mode, press [
1
m
].
Select
2
Functions
Flash EVC
.
Adjust the amount of flash.
3
0
Back
Move
Adjusting the flash amount may not be effective if:
t
the subject is too close to the camera
-
you set a high ISO speed
-
the exposure value is too big or too small
-
In some shooting modes, you cannot use this function.
t
p A h n
Option Description
Red-eye Fix
*:
The flash fires when the subject or background is dark.
t
The camera corrects red-eyes through its advanced
t
software analysis.
Slow Sync
:
The flash fires and the shutter stays open longer.
t
Select this when you want to capture ambient light to
t
reveal more details in the background.
Use a tripod to prevent your photos from blurring.
t
Fill in
:
The flash always fires.
t
Light intensity is adjusted automatically.
t
Red-eye
*:
The flash fires when the subject or background is dark.
t
The camera reduces red-eyes.
t
Auto
: The flash fires automatically when the subject or
background is dark.
The options may differ depending on the shooting mode.
* There is an interval between two bursts of the flash. Do not move until
the flash fires a second time.
Flash options are not available if you set burst options or select
t
Self-Portrait
or
Blink Detection
.
Make sure that your subjects are within the recommended distance
t
If there is reflected light or much dust in the air, tiny spots may appear
t
on your photo.
