English
Installing
Caution: Make sure to install the wall mount onto a wall that is sufficiently strong.
If you install the wall mount onto a wall made of gypsum board or wood, the product
may fall because the wall cannot support the product.
Remove the stand from the monitor.
Mark the locations of the four (4) holes
of the wall mount on the wall.
Drill the marked locations to a depth
of 35 mm using a drill with a diameter
of 6.0mm.
⒜
4EA
4EA
⒝
Fix the anchors (a) into each hole on the
wall using a hammer.
Fit the holes of the wall mount to those
of the anchors and insert the screws
(b) into the fitted holes.
A
Connect the cable before fixing the
monitor onto the wall mount.
Fix part A of the wall mount to the
groove of the stand at the bottom of
the monitor.
Summary of Contents for TWMB-1900
Page 1: ...WallmountSetupguide Guidedemontagemural ...
Page 4: ...BN68 01813A X0 ...
