33
O
P E R AT I O N
Labeling the Channels
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,
“PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter, a num-
ber, “*”, or a blank. When the INFO button is pressed, the channel label will appear
next to the channel number.
1
Press the
CH
or
CH
button to tune to the channel
that will be labeled.
2
Press the
MENU
button to dis-
play the menu, then press the
▼
button to select “Channel”.
Press the
ENTER
button.
3
Press the
▼
button to select
“Labeling”.
Press the
√
√
button to begin
labeling. The left-most field will
be highlighted.
(Each label has four fields.
See top paragraph.)
4
Press the
▲
or
▼
button to
select a letter, a number, “*”, or
a blank. (Pressing the
▲
or
▼
button results in this sequence:
A,B,...Z,*, blank,0,1,...9).
▼
Note: You cannot select
“Labeling” in the A/V mode.
5
Press the
√
√
button to switch to
the next field, which will be
highlighted. Select a second
letter or digit using the
▲
and
▼
buttons, as above. Repeat
the process to select the last
two digits.
Press the
MENU
button to set the label and clear the menus from
the screen.
