English-26
LNA (Low Noise Amplifier)
1.
Press the
MENU
button to display the menu.
Press the
…
…
or
†
†
button to select “Channel”, then press the
ENTER
button.
2.
Press the
…
…
or
†
†
button to select “LNA”, then press the
ENTER
button.
3.
Press the
…
…
or
†
†
button to select “Off” or “On”, then press the
ENTER
button.
Press the
EXIT
button to exit.
➢
If the picture is noisy with the LNA set to On, select Off.
➢
The LNA setting must be made separately for each channel.
If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the
incoming signal).
Move
Enter
Return
Channel
Auto Program
√
√
Add/Delete
: Deleted
√
√
Air/CATV
: Air
Name
: ----
LNA
: Off
√
√
TV
Move
Enter
Return
Channel
Auto Program
√
√
Add/Delete
: Deleted
√
√
Air/CATV
: Air
Name
: ----
LNA
: Off
TV
Off
On
Surf
0: 30
Using the R.Surf Feature
This feature allows you to set the TV to return to a particular channel after a certain amount of time. For example, you may be
watching a channel when commercials start. You can set the R.Surf to “5 minutes”, then switch channels. After 5 minutes, the TV will
return to the original channel. To use the R.Surf feature:
1.
While you are watching the channel to which you want to return, press the
R.SURF
button. The “Surf Off” is displayed.
2.
Press the
R.SURF
button again to set the timer in thirty second intervals,
up to five minutes.
➢
The time will start decreasing while you are setting up the timer, and will reset
after 5 minutes has passed or you turn it off.
3.
The time you set will begin counting down on the screen. When the time
runs out, the TV will return to the channel you were watching when you set
the timer.
AA68-03805A-00Eng_√÷¡æ 5/3/06 9:47 AM Page 26
