English-11
Connecting a Second VCR to Record from the TV
Your TV can send out signals of its picture and sound to be recorded by a second VCR. To do this, connect your second VCR as
follows:
1.
To begin, follow steps
1–3 in the previous
section to connect the
antenna or cable to your
VCR and your TV.
2.
Connect a video cable
between the AV OUT
[VIDEO] jack on the TV
and the VIDEO IN jack
on the VCR. Refer to
your VCR’s instructions
for more information
about how to record
using this kind of
connection.
3.
Connect a set of audio
cables between the AV
OUT [L-AUDIO-R] jacks
on the TV and the
AUDIO IN jacks on the
VCR. (The VCR input
jacks might be either on
the front or on back of
the VCR.)
➢
When connecting an external device, match the color of the connection terminal to the cable.
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
They allow you to view the camcorder tapes without using a VCR.
1.
Connect a Video Cable
(or S-Video Cable)
between the AV IN 3
[VIDEO] (or S-VIDEO)
jack on the TV and the
VIDEO (or S-VIDEO)
jack on the camcorder.
2.
Connect Audio Cables
between the AV IN 3
[L-AUDIO-R] jacks on
the TV and the AUDIO
OUT jacks on the
camcorder.
Camcorder
TV Side Panel
Audio Cable (Not supplied)
Video Cable (Not supplied)
or
S-Video Cable (Not supplied)
1
2
1
➢
Each external input source device has a different back panel configuration.
➢
When connecting an external device, match the color of the connection terminal to the cable.
1
2
VCR Rear Panel
TV Rear Panel
Antenna Cable (Not supplied)
Video Cable (Not supplied)
Audio Cable (Not supplied)
1
2
3
AA68-03871A-00Eng 7/18/06 6:07 PM Page 11
