49
English
07
Appendix
Troubleshooting
Before requesting service, please try the following solutions.
PROBLEM
SOLUTION
No operation can be
performed with the remote
control.
•
Check the batteries in the remote control. They may need
replacing.
•
Operate the remote control at a distance of no more than 6.1m
from the product.
•
Remove the batteries and hold down one or more buttons for
several minutes to drain the microprocessor inside the remote
control to reset it. Reinstall the batteries and try to operate the
remote control again.
The disc does not play.
•
Ensure that the disc is installed with the label side facing up.
•
Check the region number of the Ultra HD Blu-ray Disc/Blu-ray Disc/
DVD.
The disc Menu does not
appear.
•
Confirm that the disc has disc menus.
The prohibition message
appears on the screen.
•
This message appears when an invalid button is pressed.
•
The Ultra HD Blu-ray Disc/Blu-ray Disc/DVD's software doesn't
support the feature (e.g., angles).
•
You've requested a title or chapter number or search time that is
out of range.
Play mode differs from the
Setup Menu selection.
•
Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
The screen ratio cannot be
changed.
•
The Screen Ratio on your Ultra HD Blu-ray Disc/Blu-ray Disc/DVD
Disc is fixed and cannot be changed.
•
This is not a problem with the product.
No audio.
•
Make sure you have selected the correct Digital Output in the Audio
Options Menu.
The screen is blank.
•
If the HDMI output is set to a resolution your TV cannot support (for
example, 1080p), you may not see a picture on your TV.
•
Press the
^
(
Open/Close
) button (on the top panel) for more than
5 seconds with no disc inside. The initialisation message appears
on the screen, and the player turns off automatically. When you
turn your product on again, all the settings will be reset.
•
When the factory default settings are restored, all stored user BD
data will be deleted.