CHAPTER 3. Ubigate iBG2006 Installation
3-8
© SAMSUNG Electronics Co., Ltd.
Console Interface
A terminal (VT-100 or equivalent) or workstation with terminal emulation
software can be used for the operator console. Connect the console to the
Ubigate iBG2006 with an RJ-45 cable. For connection to a PC running
terminal emulation software, your Ubigate iBG2006 is provided with an RJ-45
to DB-9 adapter cable.
To assemble and connect the console cable:
1.
Connect the RJ-45, 8-conductor to the console port on the Ubigate
iBG2006.
Figure 3.8 Connecting Console Cable
2.
Connect the adapter with the female DB-9 connector to the
communications port on the workstation or terminal.
3.
Configure the workstation or terminal for 19,200 bps, 8 data bits, 1 stop
bit, no parity, and no flow control.
Summary of Contents for Ubigate iBG2006
