04 Running the Initial Setup
When you turn on your TV for the first time, it immediately starts the Initial Setup. The Initial Setup allows you
to configure the basic settings for the TV to operate, such as broadcast reception, channel search, and network
connection, at one time.
• Before starting the Initial Setup, be sure to connect external devices first.
• To use the TV's smart features, the TV must be connected to the Internet.
You can also start the Initial Setup using the TV's menu ( >
Settings
>
General
>
Start Setup
).
Follow the instructions displayed on the Initial Setup screen and configure the TV's basic settings to suit your
viewing environment.
Using the TV Controller
You can use the
TV Controller
on the back of the TV instead of the remote control to control most of the
functions of your TV. While watching TV or cable TV, you can change the channel or adjust the volume by
pressing the
TV Controller
button. When using Smart Hub, the TV's menu, or selecting a source, move the TV
Controller up, down, left, or right to move the cursor. Press the
TV Controller
button to select or activate the
item highlighted by the cursor.
w
/
v
: Changes the volume.
<
/
>
: Changes the channel.
TV Controller
button
The
TV Controller
button is
located on the lower left corner
of the back of the TV.
Control menu
: Opens
Smart Hub
.
: Opens the menu.
: Selects a source.
: Turns off the TV.
–
The image on your TV may differ from the image above depending on the model and geographical area.
English - 12
