English
Getting S
tar
ted
Getting Started
Installing the Stand
Preset
: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws.
Applicable to models (UE32B7000, UE32B7020) only.
■
1
Attach your LED TV to the stand.
Two or more people should carry the TV.
Make sure to distinguish between the front and back of the stand when assembling
them.
To make sure the TV is installed on the stand at a proper level, do not apply excess
downward pressure to the upper left of right sides of the TV.
2
Fasten screws at position
1
and then fasten screws at position
2
.
Stand the product up and fasten the screws. If you fasten the screws with the LED
TV placed down, it may lean to one side.
The stand is installed for models with the screen size of 37 inch and above.
■
■
■
■
■
Disconnecting the Stand
1
Remove four screws from the back of the TV.
2
Separate the stand from the TV.
Two or more people should carry the TV.
3
Cover the bottom hole with the cover.
■
1
2
3
1
2
Front
Back
[7000_UK]BN68-01985S_01Eng.indb 6
2009-04-13 �� 6:58:30