11
English
02
Connections
Changing the Input Source
Source List
Use to select TV or other external input
sources such as DVD / Blu-ray players
/ cable box / STB satellite receiver
connected to the TV.
■
TV / Ext. / PC / AV / Component
/ HDMI1/DVI / HDMI2 / HDMI3 /
HDMI4 / USB
✎
In the
Source List
, connected
inputs will be highlighted.
✎
Ext.
and
PC
always stay activated.
Edit Name
■
VCR / DVD / Cable STB / Satellite STB / PVR STB /
AV Receiver / Game / Camcorder / PC / DVI PC /
DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA
:
Name the device connected to the input jacks to make
your input source selection easier.
✎
When a PC with a resolution of 1920 x 1080 @
60Hz is connected to the
HDMI IN 1(DVI)
port,
you should set to
DVI PC
mode under
Edit Name
.
✎
When connecting an HDMI/DVI cable to the
HDMI IN 1(DVI)
port, you should set to
DVI PC
or
DVI Devices
mode under
Edit Name
.
CONNECTIONS
COMMON INTERFACE
Slot
To watch paid channels, the “CI or CI+ CARD” must be inserted.
y
If you don’t insert the “CI or CI+ CARD,” some channels will
display the message “Scrambled Signal”.
y
The pairing information containing a telephone number, the “CI or
CI+ CARD” ID the Host ID and other information will be displayed
in about 2~3 minutes. If an error message is displayed, please
contact your service provider.
y
When the configuration of channel information has finished, the
message “Updating Completed” is displayed, indicating the
channel list is updated.
✎
NOTE
x
You must obtain a “CI or CI+ CARD” from a local cable service provider.
x
When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may
cause damage to it.
x
Insert the “CI or CI+ CARD” in the direction marked on the card.
x
The location of the
COMMON INTERFACE
slot may be different depending on the model.
x
“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.
x
If you have any problems, please contact a service provider.
x
Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be
seen.
x
When you are watching the satellite TV, remove the “CI or CI+ CARD” of terrestrial and cable. The screen will be
distorted or will not be seen.
SOURCE
[UC6700_XE]BN68-02841C-00L05.indb 11
2010-03-06 오전 2:53:50
