English - 7
English
SERVICE
SERVICE
Connector for service only.
✎
✎
NOTE
•
For HDMI/DVI cable connection you must use the
HDMI IN 1(DVI)
port.
•
If an HDMI to DVI cable is connected to the
HDMI IN 1(DVI)
port, the audio does not work.
•
When connecting a PC to the HDMI cable, you must use the
HDMI IN 1(DVI)
port.
•
PC(D-Sub) and PC/DVI AUDIO IN input are not supported.
•
COMPONENT/AV IN input is not supported.
•
DIGITAL AUDIO OUT(OPTICAL) is not supported.
•
Connecting through the HDMI cable may not be supported depending on the PC.
Connecting to a COMMON INTERFACE slot
(Your TV viewing Card Slot)
To watch paid channels, the “CI or CI+ CARD” must be inserted.
•
If you do not insert the “CI or CI+ CARD”, some channels will display the
message “Scrambled Signal”.
•
The pairing information containing a telephone number, the “CI or CI+
CARD” ID the Host ID and other information will be displayed in about
2~3 minutes. If an error message is displayed, please contact your service
provider.
•
When the configuration of channel information has finished, the message
“Updating Completed” is displayed, indicating the channel list is updated.
✎
NOTE
•
You must obtain a “CI or CI+ CARD” from a local cable service
provider.
•
When removing the “CI or CI+ CARD”, carefully pull it out with your
hands since dropping the “CI or CI+ CARD” may cause damage to it.
•
Insert the “CI or CI+ CARD” in the direction marked on the card.
•
The location of the COMMON INTERFACE slot may be different depending on the model.
•
“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.
•
If you have any problems, please contact a service provider.
•
Insert the “CI or CI+ CARD” that supports the current antenna settings. The screen will be distorted or will not be seen.
Changing the Input Source
Source
TV / Ext. / HDMI1/DVI / HDMI2
Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver connected to the TV.
✎
Press the
SOURCE
button. In the displaying
Source
list, connected inputs will be highlighted.
✎
PC(D-Sub) input is not supported. If you want to connect PC to the TV, use
HDMI1/DVI
input.
✎
Ext.
always stays activated.
✎
Press the
TOOLS
button.
•
Edit Name
You can set an external input sources name you want.
– When connecting a PC to the
HDMI IN 1(DVI)
port with HDMI cable, you should set the TV to
PC
mode under
Edit Name
.
– When connecting a PC to the
HDMI IN 1(DVI)
port with HDMI to DVI cable, you should set the TV to
DVI PC
mode under
Edit Name
.
– When connecting an AV devices to the
HDMI IN 1(DVI)
port with HDMI to DVI cable, you should set the TV to
DVI Devices
mode under
Edit Name
.
•
Information
You can see detailed information about the connected external device.
TV Side Panel
y
The image may differ depending on the model.
[UF4003-RU]BN68-05625A-00L04.indb 7
2013-09-26 4:24:36
Summary of Contents for UE32FH4003W
Page 14: ...This page is intentionally left blank UF4003 RU BN68 05625A 00L04 indb 2 2013 09 26 4 24 32 ...
Page 28: ...This page is intentionally left blank UF4003 RU BN68 05625A 00L04 indb 2 2013 09 26 4 24 39 ...
Page 42: ...This page is intentionally left blank UF4003 RU BN68 05625A 00L04 indb 2 2013 09 26 4 24 45 ...
