Samsung UE32FH4003W, User Manual

English - 9

English

Installing the Wall Mount

The wall mount kit (sold separately) allows you to mount the TV 
on the wall. For detailed information on installing the wall mount, 
see the instructions provided with the wall mount. Contact a 
technician for assistance when installing the wall mount bracket. 
We do not advice you to do it yourself.
Samsung Electronics is not responsible for any damage to the 
product or injury to yourself or others if you select to install the 
TV on your own.

Wall Mount Kit Specifications (VESA)

✎

Wall mount kit is not supplied but sold separately.

Install your wall mount on a solid wall perpendicular to the floor. 
When attaching to other building materials, please contact your 
nearest dealer. If installed on a ceiling or slanted wall, it may fall 
and result in severe personal injury.

✎

NOTE

x

Standard dimensions for wall mount kits are shown in 

the table below.

x

When purchasing our wall mount kit, a detailed 

installation manual and all parts necessary for assembly 

are provided.

x

Do not use screws that do not comply with the VESA 

standard screw specifications.

x

Do not use screws longer than the standard dimension, 

as they may cause damage to the inside of the TV set.

x

For wall mounts that do not comply with the VESA 

standard screw specifications, the length of the screws 

may differ depending on their specifications.

x

Do not fasten the screws too strongly, this may damage 

the product or cause the product to fall, leading to 

personal injury. Samsung is not liable for these kinds of 

accidents.

x

Samsung is not liable for product damage or personal 

injury when a non-VESA or non-specified wall mount 

is used or the consumer fails to follow the product 

installation instructions.

x

Do not exceed 15 degrees tilt when mounting this TV.

inches

VESA Spec. (A * B)

Standard 

Screw

Quantity

19~22

75 X 75

M4

4

26

100 X 100

32~40

200 X 200

M6

46~60

400 X 400

M8

Do not install your Wall Mount 
Kit while your TV is turned on. 
It may result in personal injury 
due to electric shock.

Securing the TV to the Wall

Caution

: Pulling, pushing, or climbing onto the TV 

may cause the TV to fall. In particular, ensure that 

your children do not hang over or destabilize the TV; 

doing so may cause the TV to tip over, resulting in 

serious injuries or death. Follow all safety precautions 

provided on the included Safety Flyer. For added 

stability, install the anti-fall device for safety 

purposes, as follows.

To avoid the TV from falling 

Wall

1. 

Put the screws into the clamps and firmly fasten them onto the 

wall. Confirm that the screws have been firmly installed onto the 

wall. 

✎

You may need additional material such as an anchor 

depending on the type of wall.

✎

Since the necessary clamps, screws, and string are 

not supplied, please purchase these additionally.

2. 

Remove the screws from the centre back of the TV, put the 

screws into the clamps, and then fasten the screws onto the TV 

again.

✎

Screws may not be supplied with the product. In this 

case, please purchase the screws of the following 

specifications.

3. 

Connect the clamps fixed onto the TV and the clamps fixed onto 

the wall with a strong string and then tie the string tightly.

✎

NOTE

• 

Install the TV near to the wall so that it does not fall 
backwards.

• 

It is safe to connect the string so that the clamps 
fixed on the wall are equal to or lower than the 
clamps fixed on the TV.

• 

Untie the string before moving the TV.

4. 

Verify all connections are properly secured. Periodically check 

connections for any sign of fatigue for failure. If you have 

any doubt about the security of your connections, contact a 

professional installer.

[UF4003-RU]BN68-05625A-00L04.indb   9

2013-09-26     4:24:37