background image

English - 8

SETUP

The initial setup dialog appears when the TV is first activated. Follow the on-screen instructions to finish the 
initial setup process, including menu language choice, channel scan, network connection, and more. At 
each step, either make a choice or skip the step. Users can manually perform this process at a later time 
under the Screen Menu > 

System 

>

 Setup 

menu.

 

If you connect any device to 

HDMI1

 before starting the installation, the 

Channel Source

 will be 

changed to Settop box automatically.

 

If you do not want to select 

Set-top box

, please select 

Aerial

.

Samsung ‘On TV’ Recommendations Service

The 

On TV

 service recommends TV programmes based on their popularity or your personal preferences. 

To enjoy the On TV service, please follow the steps below. (You must have an Internet connection.)

1.  Configure your TV

: Select 

TV

 source to be used for 

On TV

.

Aerial

: Freeview, Freesat, DVB-T/C/S

Set-top box

: External Cable Box, External Satellite Box

2.  Auto tuning channels

: This step only occurs if ‘Aerial’ was selected in step 1.

3.  Select a Service Provider

: To select your preferred programme provider for On TV, enter your 

postcode and select your Freeview, Freesat or external satellite television provider from the displayed 
list.

4.  Set-top Box Control Test

: This test is for checking that your TV remote can control your Set-top Box. 

This step only occurs if ‘Set-top box’ was selected in step 1.

[UF5300-XU]BN68-04808X-03ENG.indb   8

2013-11-13     4:59:55

Summary of Contents for UE40F5300


























Reviews: