38
English
Advanced Features
Using the Timeshift Mode function
t
If you missed a live broadcast, you can see from the recorded broadcast using this feature.
When the
Timeshift Mode
is set to
Auto
, the TV stores the channel you watch currently to record automatically.
When the
Timeshift Mode
is set to
Manual
, if you press the
�
(Play) button, the TV stores the channel from the point of
view you want to record.
[
Recorded videos are DRM (digital rights management) protected and cannot be played on a PC or other TVs.
Note that files saved on the TV cannot be used after the main board is changed.
✎
NOTE
x
We recommend using a USB HDD with at least 5 400 rpm, but a USB HDD of RAID type is not supported.
x
Data broadcasts cannot be recorded.
x
The availability of both recording and the
Timeshift Mode
function may differ depending on picture quality and the
free space on the hard disk drive.
x
If you press the
▲
or
▼
button, you can see the current channel being on air, or can see the start point the recorded
broadcast.
x
The
Timeshift Mode
operates for a maximum of 90 minutes.
x
After the
Timeshift Mode
function has run for the maximum time, the time information will be fixed to “00:00:00.”
Note that if you have paused the recording the TV will automatically resume playback.
x
If the 5% free memory space limit of the USB storage device is reached, the current recording process will be closed.
x
When recording is performed by both the PVR (Personal Video Recorder) function and a device that supports the
HDMI-CEC feature, recording by the PVR function takes precedence.
x
During a playback or the
Timeshift Mode
, the picture will be displayed according to the display settings of the TV.
x
If you change the input source during recording, the screen will go blank until the change is completed.
x
An application which supports neither the recording nor the
Timeshift Mode
function will close automatically if you
try to use it during either function.
x
A message may appear in front of the application window indicating that the recording or the
Timeshift Mode
function is closed.
x
Timeshift Mode
function is not supported for analogue channels.
x
The recording and the
Timeshift Mode
functions are disabled for channels locked with
Child Lock
.
x
If the USB device has failed the
Device Performance Test
, the USB device must go through the
Device Format
and
Device Performance Test
again before you record with the
Guide
or
Channel Manager
.
x
The recording and
Timeshif Modet
functions can only be used with a USB storage device that completed the
Device Performance Test
.
x
If you attempt the recording or
Timeshift Mode
function with a device that did not have the
Device Performance
Test
, the function will not start.
x
If you press
�
(REC) on the remote control while the
Channel Manager
screen is being displayed or record with
Timer Recording
, the TV may start or stop recording 1 or 2 seconds later than you intended due to the time needed
to process the command.
x
If a USB device dedicated to recording is connected, existing
Timeshift Mode
or recording files that were saved
abnormally will automatically be deleted.
x
If you switch to external input mode during recording, the recording will continue but the
�
(REC) button will be
disabled.
x
If any function that turns off the TV (
Sleep Timer
, Off timer, etc.) is set for a time that conflicts with recording, the TV
will be turned off once the recording is complete.
[UC8000_UK]BN68-02697S-02Eng.indb 38
2010-08-24 오후 2:17:04
