E-
9
ENGLISH
Outdoor unit installation
The outdoor unit must be installed on a rigid and stable base to avoid any increase in the noise level
and vibration, particularly if the outdoor unit is to be installed in a location exposed to strong winds or
at a height, the unit must be fixed to an appropriate support(wall or ground).
Fix the outdoor unit with anchor bolts.
Note
The anchor bolt must be 20mm or higher from the base surface.
Make a drain outlet around the base for outdoor unit drainage.
If the outdoor unit is installed on the roof, you have to check
the ceiling strength and waterproof the unit.
CAUTION
Outdoor Unit Support
����
Anchor bolt
Outdoor
Unit
Base Surface
Outdoor Unit
Support
OUTDOOR UNIT INSTALLED ON THE WALL BY RACK
- Ensure the wall will be able to suspend the weight of rack and outdoor unit;
- Install the rack close to the column as much as possible;
- Install proper grommet in order to reduce noise and residual vibration trans-
ferred by outdoor unit towards wall.
Soft rubber designed to cut
off vibration from rack to wall.
(not supplied with product)
Designed to cut off
residual vibration from
outdoor unit to rack. (not
supplied with product)
Unit : mm
690
930
373
403
427
Anchor bolt hole
���
���
���
���
���
Anchor bolt hole
Type A
Type B
Summary of Contents for UH070CAV1
Page 26: ......
