▶
English
▶
I want to start .
•
Check if the device is properly connected to the TV and
check if the
(HDMI-CEC)
is set to
On
in the
Setup menu.
•
Press the
TOOLS
button to display the menu and select a
menu you want.
I want to exit .
•
Select
View TV
in the menu.
•
Press the
SOURCE
button on the TV remote control and select a
non- device.
The message “Connecting to
device...” appears on
the screen.
•
You cannot use the remote control when you are configuring
or switching to a view mode.
•
Use the remote control after the TV has completed
configuration or has finished switching to .
The device does not
play.
•
You cannot use the play function when
Plug & Play
(initial setup) is
in progress.
