background image

Air

If your TV is connected to an antenna choose 

Air

, and then press 

ENTER

E

. The TV will automatically start memorizing channels.

Cable

If your TV is connected to a cable outlet, choose 

Cable

, and then 

press 

ENTER

E

.

 Go to Step 3.

Auto

If you choose 

Auto

, and then press 

ENTER

E

, the TV will 

automatically select the correct Antenna source. Go to 
Step 3.

3.  On the Cable Type screen, use the 

◄/►/▲/▼

 

buttons to select 

the type of digital and analog cable systems you have: 

STD

HRC

or 

IRC.

 Most systems are 

STD

 (Standard). When done, select 

Start

, and then press 

ENTER

E

. The TV will start memorizing 

channels.

 

Channel memorization can take up to 45 minutes, depending 

on your cable system.

 

Memorized channels are added to the 

Added Channels

 

list. These are the channels you will see when you use the 

Channel buttons on your remote.

Clear Scrambled Channel

This function filters out scrambled channels after 

Auto Program

 is 

completed. This process may take up to 20~30 minutes.

 

Press the 

ENTER

E

 button to stop the 

Clear Scrambled 

Channel

.

 

This function is only available in 

Cable

 mode. 

 

Managing Channels

Channel List

See your list of Added channels, Favorite channels, or channels 

you've scheduled for viewing. Add or delete Favorite channels, add 

or delete channels from the Added Channels list, schedule channels 

or programs for viewing. Watch a channel by selecting the channel 

in the 

All Channels, Added Channels

, or 

Favorite

 screen, pressing 

the 

 / 

 buttons, and then pressing the 

ENTER

E

 button.

Added Channels

6  

    Air

6-1  

♥ TV #6 

7-1  

♥ TV #7

8  

    Air

9  

    Air

9-1 

♥ TV #9

10 

    Air

10-1 

♥ TV #10

11-1 

♥ TV #11

 

Air                                    

'

 Zoom  

'

 Select  

T

 Tools

Channel List Screens icons are listed on the left side. Select an 

icon using the

 

▲/▼

 

buttons to view each list.

 

 All Channels

:  Shows all currently available channels including 

those you deleted from the 

Added Channels

 

list.

 

 Added Channels

: Shows all 

Added Channels

. These are the 

channels that appear when you press the CH LIST button.

 

*

 Favorite

: Shows all favorite channels.

 

 Programmed

:    Shows all channels and programs currently 

scheduled using 

Timer Viewing

.

 

Remote control buttons active on the 

Channel List

 screen.

 

x

Green (

Zoom

): Enlarges or shrinks a channel number.

 

x

Yellow (

Select

): Move the cursor to a channel. Press the Yellow 

button to select the channel. A 

c

 mark appears. Repeat to select 

additional channels. Then, open the Tools menu and apply a 

function to the channels you selected.

 

x

T

 (

Tools

): Displays the 

Channel List

 Tools menu. (The 

Tools

 

menus may differ depending on the situation.)

Display Icons Used in the Channel List Screens

Icons

Meaning

c

A selected channel.

*

A Favorite channel.

)

A reserved program.

(

A program currently being broadcast.  

 

The Channel List Tools Menu 

t

The Channel List Tools menu contains most of the functions you 

can use on the 

All Channel

Added Channels

, and 

Favorite

 List 

screens. To view, select a list screen, select a channel, and then 

press the 

TOOLS

 button.

 

Add / Delete

: Delete a channel from or add a channel to the 

Added Channels

 list.

To delete channels from the 

Added Channels

 list, follow these steps:

1.  Select one or more channels in the 

Added Channels

 list using 

the 

▲/▼

 buttons and the Yellow Select button on your remote.

2.  Press the 

TOOLS

 button on your remote. The Tools menu 

appears

.

3.  Select 

Delete

 in the Tools menu, and then press the 

ENTER

E

 

button.

To add channels to the 

Added Channels

 list, follow these steps:

1.  Select one or more channels in the 

All Channels

 list using the 

▲/▼

 buttons and the Yellow Select button on your remote.

2.  Press the 

TOOLS

 button on your remote. The Tools menu 

appears

.

3.  Select 

Add

 in the Tools menu, and then press the 

ENTER

E

 

button.

 

All deleted channels will be shown on the 

All Channels

 list. 

You add channels back to the 

Added Channels

 list on the 

All Channels

 list.

 

A gray-colored channel indicates the channel has been 

deleted from the 

Added Channels

 list. 

 

The 

Add

 menu option only appears for deleted channels.

 

Add to Favorite/Delete from Favorite

: Lets you add channels to 

and delete channels from your 

Favorites

 list.

To add channels to the 

Favorites

 list, follow these steps:

1.  Select one or more channels in the 

All Channels

 list using the 

▲/▼

 buttons and the Yellow Select button on your remote.

2.  Press the 

TOOLS

 button on your remote. The Tools menu 

appears

.

3.  Select 

Add to Favorite

 in the Tools menu, and then press the 

ENTER

E

 button.

To delete channels from the 

Favorites

 list, follow these steps:

1.  Select one or more channels in the 

Favorite

 Channels list 

using the 

▲/▼

 buttons and the Yellow Select button on your 

remote.

2.  Press the 

TOOLS

 button on your remote. The Tools menu 

appears.

3.  Select 

Delete from Favorite

 in the Tools menu, and then 

press the 

ENTER

E

 button.

 

Timer Viewing

: You can schedule a channel to be displayed 

automatically at a set time, even when you are watching another 

channel. You must set the current time first in the 

Time

 > 

Clock

 

function to use 

Time Viewing

.

To schedule a channel, follow these steps:

1.  Select a channel in the 

Added Channels

 list using the 

▲/▼

 

buttons and the Yellow Select button on your remote.

2.  Press the 

TOOLS

 button on your remote. The Tools menu 

appears

.

3.  Select 

Time Viewing

 in the Tools menu, and then press the 

ENTER

E

 button. The Time Viewing screen appears.

Antenna

Channel

Repeat

DTV Air

6-1

Once

 L

 Move

 U

 Adjust 

Enter 

R

 

Return 

Timer Viewing

Date

Start Time

01-01-2014

12 : 01 am

4.  Use the 

◄/►

 buttons to move from entry field to entry field 

and the 

▲/▼

 

buttons to change the entries. Where numbers 

are displayed, you can also enter numbers directly using the 

number keypad on your remote.

 

If you select 

Everyday

 or 

Every Week

, the date you 

select in the Date field becomes the start date for your 

scheduled viewing. For 

Everyday

, the TV will turn on 

every day, at the time you selected, starting from that 

date. For 

Everyweek

, the TV will turn on every week, 

on the same day of the week as the start date you 

selected, at the time you selected, from that day on. If 

you select 

Once

, the TV will turn on once, on the date 

and time you selected.

5.  Press the 

ENTER

E

 button on your remote when done.

 

Only 

Added Channels

 can be scheduled.

 

Scheduled programs and channels are displayed in the 

Programmed

 List.

 

When you select a digital channel, press the 

 button to 

view the digital program list. If you highlight a program in 

the list, and then press the 

ENTER

E

(

Schedule

) button, 

you set 

Timer Viewing

 for that program directly.

 

Channel Name Edit

: Analog channels only. Lets you assign a 

name of up to five characters to an analog channel. For example, 

Hist, Food, Golf, etc. This makes it easier to find and select a 

channel.

 

Select All

: Select all the channels in the displayed channel list.

 

Deselect All

: Deselect all the selected displayed channels. 

 

You can only select 

Deselect All

 when one or more 

channels are selected.

 

Auto Program

: See 

Auto Program

 under Memorizing Channels.

 Programmed List (on the Channel List Screen)

The 

Programmed

 list displays the channels and programs you 

have scheduled for viewing using the 

Time Viewing

 function. You 

can view, modify, or delete a show you have scheduled using the 

functions on the 

Programmed

 List screen Tools menu.

Programmed List Screen Tools Menu 

t

 

Change Info

: Change the scheduling information for a show or 

channel you have scheduled.

To change the information, follow these steps:

1.  Select the 

Programmed

 List icon on the left side of the 

Channel List

 screen, and then press the 

ENTER

E

 button.

2.  On the 

Programmed

 List screen, select the show or channel 

entry you want to change, and then press the 

TOOLS

 button. 

The Tools Menu appears.

3.  Select 

Change Info

, and then press the 

ENTER

E

 button. 

The 

Time Viewing

 screen appears.

4.  Use the 

◄/►

 buttons to move from entry field to entry field 

and the 

▲/▼

 

buttons to change the entries. Where numbers 

are displayed, you can also enter numbers directly using the 

number keypad on your remote.

5.  Press the 

ENTER

E

 button when done.

 

Cancel Schedules

: Cancel a show or channel you have 

scheduled.

To cancel a scheduled show or channel, follow these steps:

1.  Select the 

Programmed

 List icon on the left side of the 

Channel List

 screen, and then press the 

ENTER

E

 button.

2.  On the 

Programmed

 List screen, select the show or channel 

entry you want to cancel, and then press the 

TOOLS

 button. 

The Tools Menu appears.

3.  Select 

Cancel Schedules

, and then press the 

ENTER

E

 

button. The 

Cancel Schedule

 screen appears.

4.  Select 

OK

, and then press the 

ENTER

E

 button.

 

Information

: Display the information for a show or channel you 

have scheduled. You can also change the schedule Information.

1.  Select the 

Programmed

 List icon on the left side of the 

Channel List

 screen, and then press the 

ENTER

E

 button.

2.  On the 

Programmed

 List screen, select the show or channel 

entry you want information for, and then press the 

TOOLS

 

button. The Tools Menu appears.

3.  Select 

Information

, and then press the 

ENTER

E

 button. 

The 

Time Viewing

 Information screen appears.

4.  Select 

Change Info

 and press the 

ENTER

E

 button to 

change information, or select 

Close

 and press the 

ENTER

E

 

button to close the Information screen.

 

Select All / Deselect All

: You can select or deselect all channels 

in the channel list. 

 

Other Channel Menu Functions

Channel Mode (Added Channels/Favorite 
Channels)

Lets you select the channel list displayed when you press the 

<

CH

>

 (Channel) button on your remote. For example, if you 

select Favorite Channels, you will only see Favorite channels when 

you press the 

<

CH

>

 button.

Fine Tune

 

Analog channels only.
If the reception is clear, you do not have to fine tune the channel, 

as this is done automatically during the search and store 

operation. If the signal is weak or distorted, fine tune the channel 

manually.

 

Select the channel, and then select 

Fine Tune

.

 

Fine tuned channels that have been saved are marked with 

an asterisk “*” on the right-hand side of the channel number 

in the channel banner.

 

To reset fine-tuning, select the channel, select 

Fine Tune

, and 

then select 

Reset

 on the 

Fine Tune

 screen.

Setup Menu

Plug & Play

Lets you re-run the 

Plug & Play

 initial setup procedure. For 

instructions, see your Quick Start Guide.

Language

Set the menu language.

 

Choose between 

English

Español,

 and 

Français

.

 

Setting the Time

Time

 

The time you set will appear when you press the 

INFO

 

button.

 

Clock

: Set the clock so you can use the various timer features 

of the TV.

 

If you disconnect the power cord, you have to set the 

clock again.

To set the clock, follow these steps

:

1.  Select 

Setup

 >

Time

 > 

Clock

.

2.  Press 

ENTER

E

 and select 

Auto

 or 

Manual

, and then press 

ENTER

E

 again. 

If you selected Auto:

The TV will automatically download the correct time from a 

digital channel.

• 

Select 

Time Zone

, and then press the 

ENTER

E

 button. 

Use the

▲/▼

 buttons to select your 

Time Zone

, and then 

press 

ENTER

E

.

• 

Select DST (Daylight Savings Time), and then press 

ENTER

E

. Select 

On

 if you want to turn the DST 

adjustment on and off manually. Select 

Off

 to turn off the 

DST adjustment. Select 

Auto

 if you want the TV to adjust 

to DST automatically.  Press 

ENTER

E

 when done.

 

DST

 and 

Time Zone

 function are only available when 

the 

Clock Mode

 is set to 

Auto

.

If you selected Manual:

The 

Clock Set

 screen appears. Use the 

▲/▼

 buttons to 

change the values in each field or use the number buttons to 

enter the values directly. Use the 

◄/►

 buttons to move from 

field to field. When done with all the fields, press 

ENTER

E

.

 

Available only when 

Clock Mode

 is set to 

Manual

.

 

Sleep Timer 

t

Automatically shuts off the TV after a preset period of time. (30, 
60, 90, 120, 150 and 180 minutes).

 

To cancel the 

Sleep Timer

, select 

Off

.

Timer 1 / Timer 2 / Timer 3

Turns the TV on and off automatically at times and days you 

select. You can set three different on/off timer settings. 

 

You must set the clock first.

 

On Time / Off Time

: Set the hour, minute, am/pm, and 

Activate/Inactivate fields for the 

On Time

 and 

Off Time

. Use the 

◄/►

 buttons to move from field to field. Use the 

▲/▼

 buttons 

to change the values in each field. To activate the timer with 

the setting you have chosen, set the Activate/Inactivate field to 

Activate

.  

 

Volume

: Set the desired loudness.

 

Contents

: To select what will be turned on when the timer 

setting is activated. You can set the TV to turn on a specific 

channel or play back contents such as photo or audio files.
Use the

 

◄/►

 

buttons to move to move to the Contents field, 

and then press the 

ENTER

E

 button. The Contents screen 

appears. Use the

 

◄/►

 buttons to move from field to field. Use 

the 

▲/▼

 

buttons to change the values in each field.

-   TV/USB

: Select 

TV

 or 

USB

. The USB device must be 

connected to your TV before you can select USB.

- Antenna

: Displays the current antenna source, 

Air

 or 

Cable

.

- Channel

: If you have selected TV, select the desired channel.

-   Music/Photo

: If you have selected USB, follow these steps to 

select a folder containing MP3 (Music) or JPEG (Photo) files on 

the USB device:

 

The maximum displayed number of files, including sub 

folders, in one folder of USB storage device is 2000.

 

The media may not be playing smoothly when using the 

device lower than USB 2.0.

1.  Use the 

◄/►

 buttons to move to the field under 

Music

 

or the field under 

Photo

, and then press the 

ENTER

E

 

button. The TV displays a single folder (the Root folder) 

and the type or name of the device. 

2.  Press the 

ENTER

E

 button. A list of folders on the device 

appears.

 

If there are no folders on your device, press the 

Yellow

 select button to select the Root folder, and 

then press the 

RETURN

 button. The Timer screen 

re-appears.

3.  Use the 

▲/▼

 buttons to highlight a folder that contains 

music or photos, and then press the 

Yellow

 select button 

to select the folder.

4.  Press the 

RETURN

 button. The Timer screen re-appears.

 

Repeat

: Select 

Once

Everyday

Mon~Fri

Mon~Sat

Sat~Sun

 or 

Manual

. If you select 

Manual

, you can select the 

days you want to activate the timer by using the 

◄/► 

buttons 

to highlight the day, and then pressing the 

ENTER

E

 button. 

To unselect a day, highlight it, and then press the 

ENTER

E

 

button.

When you finished making all your selections on the Timer screen, 

press either the 

ENTER

E

 or 

RETURN

 button.

 The On Screen Menus

Your TV has two kinds of menus, the Main menu and the various 

Tools menus. The Main menu gives you access to most or all of 

the menu options available on your TV. The Tools menus display 

a selected number of frequently used menu options that change 

depending on the screen you are viewing.
The Main menu has seven primary categories:

 

y

Picture

 

y

Input

 

y

Sound

 

y

Application

 

y

Channel

 

y

Support

 

y

Setup

To view the Main menu, press the 

MENU

 button on your remote. To 

view a Tools menu, press the 

TOOLS

 button on your remote.

 

The menu options that appear in the Main menu depend 

on the Source you have selected. For example, if you have  

selected the HDMI source, the Channel category will not 

appear. To see the Channel category, you must first select TV 

in the Source List.

The Menu options are presented below, arranged by Main menu 
categories. A Tools button symbol 

(

t

next to an option 

name indicates the option is also available in one of the Tools 

menus.

Picture Menu

Mode 

t

Select your preferred picture mode.

 

When your TV is connected to a PC, you can only select 

Entertain

 and 

Standard

.

 

Dynamic

: Brightens the screen. Suitable for a bright room.

 

Standard

: Suitable for a normal.

 

Movie

: Darkens the screen, making it less glary. Suitable for 

watching movies in a darkened room.

 

Entertain

: Sharpens the picture. Suitable for games.

 

Only available when the 

TV

 is connected to a 

PC

.

Backlight / Contrast / Brightness / Sharpness / 
Color / Tint (G/R) 

 

Backlight

: Adjusts the brightness of the screen by adjusting the 

brightness of the individual pixels.

 

Contrast

: Increases or decreases the contrast between dark and 

light areas of the picture.

 

Brightness

: Adjusts the brightness of the screen. Not as 

effective as Backlight.

 

Sharpness

: Sharpens or dulls the edges of objects.

 

Color

: Adjusts the color saturation. The higher the Color setting, 

the more intense the color. Low settings remove color and the 

picture becomes black, white and gray.

 

Tint (G/R)

: Adjusts the amount of green and red in the picture. 

As you increase the amount of green, the amount of red 

decreases and vice versa.

 

When the TV is connected to a PC, you can only make 

changes to 

Backlight, Contrast, Brightness, 

and

 

Sharpness.

Picture Options

 

When the TV is connected to a PC, you can only make 

changes to the 

Color Tone

Size

 and 

HDMI Black Level

.

 

Color Tone (Cool / Standard / Warm)

: Cool makes the picture 

bluer (cooler). Warm 1 and Warm 2 make the picture redder 

(warmer).

 

Size

: Set the size and aspect ratio of the picture on the screen.

Your cable box or satellite receiver may have its own set of 

screen sizes as well. However, we highly recommend you use 

the TVs 16:9 mode most of the time.

 

The menu is deactivated, when the H. 264 (1080p) DTV is 

being played.

16:9

: Sets the picture to the 16:9 wide screen format.

Zoom1

: Provides moderate magnification of the picture. Sides, 

top, and bottom are cut off.

Zoom2

: Provides larger magnification of the picture. Sides, top, 

and bottom are cut off.

Wide Fit

: Enlarges the aspect ratio of the picture so the picture 

fits the entire screen.

4:3

: Sets the picture to the old, 4:3 format and puts black or gray 

borders on the right and left of the picture.

 

Do not watch your TV in the 4:3 format for a long time. 

Traces of borders displayed on the left, right and center of 

the screen may cause image retention (screen burn) which 

is not covered by the warranty.

Screen Fit

: Displays the full image without any cut-off when 

your TV is inputting HDMI (720p / 1080i / 1080p) or Component 

(1080i / 1080p) HD signals.

 

HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p 

(1920x1080) or 720p (1280x720) resolution.

 

You can adjust and store settings for each external device you 

have connected to an input on the TV. Picture Sizes available 

by Input Source are listed below:

Input Source

Picture Size

ATV, AV, Component (480i, 480p)

16:9

,

 Zoom1

,

 

Zoom2

,

 4:3

DTV (1080i), Component (1080i, 1080p), HDMI 
(720p, 1080i, 1080p)

16:9

,

 Wide Fit

,

 

4:3

,

 Screen Fit

 

Digital Clean View (Off / Low / Medium / High / Auto) 

: If the 

broadcast signal received by your TV is weak, you can activate 

the 

Digital Clean View

 feature to reduce any static and ghosting 

that may appear on the screen.

 

When the signal is weak, try all the Digital Clean View 

options until the TV displays the best picture.

 

HDMI Black Level (Normal / Low) 

: For HDMI signals, select 

the black level to adjust the screen depth. Low make blacks look 

darker.

 

Available only in 

HDMI

 mode (RGB signals).

 

Film Mode (Off / Auto) 

: Sets the TV to automatically sense and 

process film signals from all sources and adjusts the picture for 

optimum quality.

 

Available in ATV, DTV (interlace), AV, COMPONENT (480i / 

1080i) and HDMI (480i / 1080i).

 

Motion Lighting (Off / On)

: Reduce power consumption by 

brightness control adapted motion.

 

Available in 

Standard

 mode only.

Picture Reset

 

Picture Reset (Reset Picture Mode/Cancel)

: Resets the 

picture settings to their factory defaults.

 

Other Features

Program Rating Lock

The 

Program Rating Lock

 feature lets you block programs 

you've determined are inappropriate for your children based on 

the program's ratings. To access the 

Program Rating Lock 

feature and make any changes, you must enter a PIN (personal 

identification number). To watch a blocked program, you must also 

enter the same PIN.

 

Program Rating Lock

 is not available in 

HDMI 

or

 

Component

 mode.

 

The default PIN number of a new TV set is “0-0-0-0”. You can 

set your own PIN using the 

Change PIN

 function.

How It Works

When you access the 

Program Rating Lock

 Menu functions for 

the first time, the PIN input screen appears. Enter 0-0-0-0. The PIN 

screen closes and the 

Program Rating Lock

 Menu appears. Every 

time you access the 

Program Rating Lock

 functions, the PIN 

screen will appear and you must enter a PIN.
When the Rating Lock screen appears, select 

Program Rating 

Lock

, and then press 

ENTER

E

. Select 

On

, and then press the 

ENTER

E

 key again. Depending on what type of programs or 

movies you want to block, select one of the options on the screen, 

and then press the 

ENTER

E

 button. The options are listed below:

 

TV Parental Guidelines

: You can block TV programs based 

on their ratings. This function allows you to control what your 

children are watching.

 

MPAA Rating

: You can block movies based on their MPAA 

ratings. The Motion Picture Association of America (MPAA) has 

implemented a rating system that provides parents or guardians 

with advanced information on which films are appropriate for 

children.

 

Canadian English

: You can block TV programs based on their 

Anglophone Canadian ratings.

 

Canadian French

: You can block TV programs based on their 

French Canadian ratings.

 

Downloadable U.S. Rating

: Parental restriction information can 

be used while watching DTV channels.

Locking/Blocking Programs or Movies

You lock or block programs and/or movies in essentially the same 

way for each option. Each option displays a grid or table. All the 

tables have ratings listed on the left. The TV Parental Guidelines 

option also has kinds of content listed across the top: 

ALL

: Lock all 

TV ratings. / 

FV

: Fantasy violence / 

V

: Violence / 

S

: Sexual situation 

L

: Adult Language / 

D

: Sexually Suggestive Dialog.

To lock/block movies or shows with certain ratings and/or kinds of 

content, click the square next to the rating and/or under the kind of 

content. A lock appears. To unlock/unblock, click the square again. 

When you click a low rating, all the ratings above it will also display 

locks. You can also Allow All or Lock All. When done, press the 

RETURN

 button on your remote.

 

Change PIN

: The Change PIN screen will appear. Choose any 

4 digits for your PIN and enter them in 

Enter New PIN 

fields. 

Re-enter the same 4 digits in 

Confirm New PIN 

fields. When the 

Change PIN screen disappears, press the 

OK

 button. The TV 

has memorized your new PIN.

 

If you forget the PIN, press the remote-control buttons in 

the following sequence, which resets the pin to “0-0-0-0” : 

POWER

 (off) 

 

MUTE

 

 8 

 2 

 4 

 

POWER

 (on)

Game Mode (On/Off)

When you connect a game console such as a PlayStation™ 

or Xbox™ to your TV, you can enjoy a more realistic gaming 

experience by turning on the 

Game Mode

 function.

 

Precautions and limitations for game mode:

 

x

Before you disconnect the game console and connect another 

external device, set 

Game Mode

 to 

Off

 in the setup menu.

 

x

If you display the TV menu in 

Game Mode

, the screen shakes 

slightly.

 

Game Mode

 is not available when the input source is set to 

TV

 

After connecting the game console, set 

Game Mode

 to 

On

You may notice slightly reduced picture quality.

Caption

(On-Screen Text Dialogue)

 

Caption

: You can switch the caption function on or off. If 

captions are not available, they will not be displayed on the 

screen.

 

The 

Caption

 feature does not work in 

Component

 or 

HDMI

 mode.

 

Caption Mode

: You can select the desired caption mode.

Default / CC1~CC4 / Text1~Text4

: (analog channels only) The 

Analog Caption function operates in either analog TV channel 

mode or when a signal is supplied from an external device to the 

TV. (Depending on the broadcasting signal, the Analog Caption 

function may or may not work with digital channels.)

Default / Service1~Service6 / CC1~CC4 / Text1~Text4

(Digital channels only) The Digital Captions function works with 

digital channels.

 

Service1~6

 may not be available in digital caption mode 

depending on the broadcast.

 

Digital Caption Options

: (Digital channels only)

Size

: Options include Default, Small, Standard and Large. The 

default is Standard.

Font Style

: Options include Default and Styles 0 to 7. The 

default is Style 0.

Foreground Color

: Options include Default, White, Black, Red, 

Green, Blue, Yellow, Magenta and Cyan. You can change the 

color of the letters. The default is White.

Background Color

: Options include Default, White, Black, Red, 

Green, Blue, Yellow, Magenta and Cyan. You can change the 

background color of the captions. The default is Black.

Foreground Opacity

: This adjusts the opacity of text. Options 

include Default, Transparent, Translucent, Solid and Flashing.

Background Opacity

: This adjusts the opacity of the caption 

background. Options include Default, Transparent, Translucent, 

Solid and Flashing.

Return to Default

: This option sets each Size, Font Style, 

Foreground Color, Background Color, Foreground Opacity and 

Background Opacity to its default.

 

Digital Caption Options

 are available only when you can 

select 

Default

 and 

Service1 ~ Service6

 in 

Caption Mode

.

 

The Foreground and Background cannot be set to the 

same color.

Figures and illustrations in this User Manual are provided for reference 

only and may differ from actual product appearance. Product design and 

specifications may be changed without notice.

Important Warranty Information Regarding 
Television Format Viewing

 

See the warranty card for more information on warranty 

terms.

Wide screen format LED Displays (16:9, the aspect ratio of the 

screen width to height) are primarily designed to view wide screen 

format full-motion video. The images displayed on them should 

primarily be in the wide screen 16:9 ratio format, or expanded to 

fill the screen if your model offers this feature and the images are 

constantly moving. Displaying stationary graphics and images on 

screen, such as the dark sidebars on non- expanded standard 

format television video and programming, should be limited to no 

more than 5% of the total television viewing per week. Additionally, 

viewing other stationary images and text such as stock market 

reports, video game displays, station logos, web sites or computer 

graphics and patterns, should be limited as described above for 

all televisions. Displaying stationary images that exceed the above 

guidelines can cause uneven aging of LED Displays that leave 

subtle, but permanent burned-in ghost images in the LED picture. 

To avoid this, vary the programming and images, and primarily 

display full screen moving images, not stationary patterns or dark 

bars. On LED models that offer picture sizing features, use these 

controls to view different formats as a full screen picture. Be careful 

in the selection and duration of television formats you use for 

viewing. Uneven LED aging as a result of format selection and use, 

as well as burned-in images, are not covered by your Samsung 

limited warranty.

• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED 

WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations 
of the original Limited Warranty supplied with Samsung Electronics 
(SAMSUNG) products, and the requirements, conditions, exclusions 
and limitations contained herein, SAMSUNG will additionally 
provide Warranty Repair Service in the United States on SAMSUNG 
products purchased in Canada, and in Canada on SAMSUNG 
products purchased in the United States, for the warranty period 
originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a 
SAMSUNG Authorized Service Center. Along with this Statement, 

the Original Limited Warranty Statement and a dated Bill of Sale 

as Proof of Purchase must be presented to the Service Center. 

Transportation to and from the Service Center is the responsibility of 

the purchaser. Conditions covered are limited only to manufacturing 

defects in material or workmanship, and only those encountered 

in normal use of the product. Excluded, but not limited to, are 

any originally specified provisions for, in-home or on-site services, 

minimum or maximum repair times, exchanges or replacements, 

accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please 

call toll-free:
–– In the United States : 1-800-SAMSUNG (1-800-726-7864)
–– In Canada : 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture files) or still 

image elements (such as TV channel logos, TV shows or movies 

in panorama or 4:3 format, stock or news scroll bars, etc.) on the 

screen. The constant display of still pictures can cause ghosting or 

image burn-in (image retention) on the LED screen, which will affect 

image quality. To reduce the risk of this effect, please follow the 

recommendations below:

• 

Avoid displaying the same TV channel for long periods.

• 

Always try to display any image in full screen mode. Use the TV's 

Picture Options menu to select the optimal screen size.

• 

Reduce brightness and contrast values to the minimum required 

to achieve the desired picture quality.  Values that exceed the 

minimum may speed up the burn-in process.

• 

Frequently use all TV features designed to reduce image retention 

and screen burn-in. Refer to proper user manual section for 

details.

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, 
please contact the SAMSUNG customer care center.

Country

CANADA

U.S.A

Address

Samsung Electronics 
Canada Inc. 2050 Derry 
Road West, Mississauga, 
Ontario L5N 0B9 Canada

Samsung Electronics 
America, Inc. 85 
Challenger Road 
Ridgefield Park, NJ 07660

Customer Care 

Center 

1-800-SAMSUNG (726-7864)

Web Site

www.samsung.com/ca/
support (English)
www.samsung.com/ca_fr/
support (French)

www.samsung.com/us/
support

LED TV

user manual

© 2014 Samsung Electronics Co., Ltd. All rights reserved.

- 2 -

- 1 -

- 6 -

- 5 -

- 3 -

- 7 -

- 4 -

- 8 -

BN68-05829L-00

Sound Menu

Mode

 

t

 

Standard

: Selects the normal sound mode.

 

Music

: Emphasizes music over voices.

 

Movie

: Provides the best sound for movies.

 

Clear Voice

: Emphasizes voices over other sounds.

Equalizer

Available in Standard sound mode only.

 

Balance L/R

: Adjusts the balance between the right and left 

speaker.

 

100Hz / 300Hz / 1KHz / 3KHz / 10KHz 

(Bandwidth 

Adjustment): Adjusts the loudness of specific bandwidth 

frequencies.

 

Reset

: Resets the equalizer to its default settings.

DTS TruSurround

Available in Standard sound mode only.
DTS TruSurround is a patented DTS technology that solves 

the problem of playing 5.1 multichannel content over two 

speakers. TruSurround delivers a compelling, virtual surround 

sound experience through any two-speaker playback system, 

including internal television speakers. It is fully compatible with all 

multichannel formats.

Preferred Language

Digital channels only.
Digital-TV broadcasts can transmit many audio tracks 

simultaneously (for example, simultaneous translations of a program 

into foreign languages).

 

You can only select a language from among the ones being 

broadcast.

Multi-Track Sound (MTS)

Analog channels only.

 

Mono

: Select for channels that are broadcasting in mono or if 

you are having difficulty receiving a stereo signal.

 

Stereo

: Select for channels that are broadcasting in stereo.

 

SAP

: Select to listen to the Separate Audio Program, which is 

usually a foreign-language translation.

 

Depending on the program being broadcast, you can listen to 

Mono, Stereo

 or 

SAP

.

Auto Volume

Automatically adjusts the volume level when you change video 

sources or content so the level remains the same.

SPDIF Output

The SPDIF (Sony Philips Digital InterFace) outputs an 

uncompressed digital audio signal when you connect the digital 

audio jack on the back of the TV to a digital audio in jack on a 

receiver or home theater.

 

Audio Format (PCM/Dolby Digital)

: You can select the Digital 

Audio output (SPDIF) format. The available Digital Audio output 

format may differ depending on the input source.

 

By connecting the TV to a receiver or home theater with 

Dolby Digital

 and 5.1ch speakers and selecting 

Dolby 

Digital

, you can maximize your interactive 3D sound 

experience.

 

Audio Delay

: Lets you correct timing mismatches between the 

audio track and the video when you are watching the TV and 

listening to digital audio output from the TV through an external 

device such as an AV receiver. When you select 

Audio Delay

, a 

slider appears. Use the left and right arrow buttons to adjust the 

slider. Press 

ENTER

E

 when done (0ms ~ 250ms).

Speaker Select

A sound echo may occur due to a difference in decoding speed 

between the main speaker and the audio receiver. In this case, set 

the TV to 

External Speaker

.

 

When 

Speaker Select

 is set to 

External Speaker

, the 

volume and 

MUTE

 buttons will not operate and the sound 

settings will be limited.

 

When 

Speaker Select

 is set to 

External Speaker

.

 

x

TV Speaker

: Off, 

External Speaker

: On

 

When 

Speaker Select

 is set to 

TV Speaker

.

 

x

TV Speaker

: On, 

External Speaker

: On

 

If there is no video signal, both speakers will be mute.

Visual Impaired

Digital channels only.
Adds verbal description to the main audio to help the visually 

impaired.

Sound Reset

 

Reset All

: Resets all sound settings to the factory defaults.

Channel Menu

 

Memorizing Channels

When you first set up your TV using 

Plug & Play

, the TV 

memorized the channels that were available over the air or through 

your cable system and added them to the 

Channel List

. The 

Antenna

 and 

Auto program

 functions described below let you 

re-run the channel memorization function without having to re-run 

the 

Plug & Play

 procedure.

Antenna (Air / Cable) 

Before your television can memorize the available channels, you 

must select your TV's signal source, 

Air

 (using an antenna) or 

Cable

. Select Menu >

Channel

 > 

Antenna

 > 

Air

 or 

Cable

. After 

you have selected the signal source, go on to the Auto Program 

function.

 

Selecting the signal source using the 

Antenna

 function also 

determines the signal source the TV is tuned to. For example, 

if you receive your TV signal over the air, and you select 

Cable

, you will see only snow. You must select Air to see a 

picture.

Auto Program 

The 

Auto Program

 function  memorizes all channels that are 

available over the air or through your cable system and adds them 

to the 

Channel List

.

To start 

Auto Program

, follow these steps:

1.  Push 

MENU

m

 

 

Channel

 

 

Auto Program

 

 

ENTER

E

 

on your remote. The Antenna Source screen appears.

2.  On the Antenna Source screen, select the source of your TV 

signal.

Boot Logo

Enable/disable displaying the logo while the TV starts up.

Eco Solution

 

 

Energy Saving (Off / Low / Medium / High / Picture Off) 

This adjust the brightness of the TV in order to reduce power 

consumption. If you select 

Picture Off

, the screen is turned 

off, but the sound remains on. Press any button except volume 

button to turn on the screen. 

 

Eco Sensor (Off / On)

: To enhance your power savings; the 

picture settings will automatically adapt to the light in the room.

 

If you adjust the Backlight, the Eco Sensor will be set to Off.

Min. Backlight

: When Eco Sensor is On, the minimum screen 

brightness can be adjusted manually.

 

If Eco Sensor is On, the display brightness may change 

(become slightly darker in most cases) depending on the 

surrounding light intensity.

 

No Signal Power Off (Off / 15 min. / 30 min. / 60 min.)

: Sets 

how quickly the TV switches to standby mode, if no picture is 

being received.

 

Disabled when the PC is in power saving mode.

 

Auto Power Off (Off / On)

: The TV will be automatically turned 

off when no user operation is received for 4 hours.

Auto Protection Time 

 

Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10 

hours)

: If the screen remains idle with a still image for a certain 

period of time you define, the screen saver is activated to prevent 

the formation of ghost images on the screen.

Support Menu

Self Diagnosis

 

Picture Test

: Use to check for picture problems. If the problem 

appears in the test picture, select Yes and follow the directions 

on the screen.

 

Sound Test

: Use the built-in melody sound to check for sound 

problems. If the problem occurs during the test, select Yes and 

follow the directions on the screen.

 

Signal Strength

: (Digital channels only) An HD channel’s 

reception quality is either perfect or the channels are unavailable. 

Adjust your antenna to increase signal strength.  

 

Reset

: Reset all settings to the factory defaults.

 

The PIN input screen appears before the setup screen.

 

Enter your 4-digit PIN. Change the PIN using the 

Change 

PIN

 option.

Software Upgrade

Software Upgrade

 can be performed by downloading the latest 

firmware from samsung.com to a USB memory device.

HD Connection Guide

Refer to this information when connecting external devices to the 

TV.

Contact Samsung

View this information when your TV does not work properly or 

when you want to upgrade the software. You can find information 

regarding our call centers and how to download products and 

software.

Media Play

Enjoy photos, music and/or movie files saved on a 

USB Mass Storage Class (MSC) device.

P

POWER

MEDIA.P

 

Connecting a USB Device

1. 

Turn on your TV.

2. 

Connect a USB device containing photo, music, and/or movie 

files to the 

USB

 jack on the back of the TV. A pop up window 

appears.

3. 

Press the 

MEDIA.P

 

button on your remote. The 

Media Play

 

menu appears.

 

Using the Media Play Menu

SUM

 

Change Device

E

 Enter    

R

 Return

Media Play

Videos

To open 

Media Play

 in the Menu, follow these steps:

1. 

Press the 

MENU

 button. Then, press the 

 or 

 button to 

select 

Application 

on the left, and then press the 

ENTER

E

 

button.

2. 

Press the 

 or 

▼ 

button to select 

Media Play (USB)

, and then 

press the 

ENTER

E

 button.

3. 

Press the 

 or 

 button to select an icon (

Videos, Music, 

Photos, Settings

), and then press the 

ENTER

E

 button.

 

Media Play

 might not work properly with unlicensed 

multimedia files.

 

Need-to-Know List before using 

Media Play (USB)

 

x

The file system supports FAT16, FAT32 and NTFS.

 

x

Certain types of USB Digital camera and audio devices may not 

be compatible with this TV.

 

x

Media Play 

only supports USB Mass Storage Class (MSC) 

devices. MSC is a Mass Storage Class Bulk-Only Transport 

device. Examples of MSC are Thumb drives and Flash Card 

Readers. Devices should be connected directly to the TV’s USB 

port. USB HDD is not supported. 

 

x

Before connecting your device to the TV, please back up your 

files to prevent them from damage or loss of data. SAMSUNG is 

not responsible for any data file damage or data loss.

 

x

A USB device that requires high power (more than 0.5A) may not 

be supported.

 

x

Do not disconnect the USB device while it is loading.

 

x

The higher the resolution of the image, the longer it takes to 

display on the screen.

 

x

The maximum supported JPEG resolution is 15360 x 8640 pixels.

 

x

If a file is corrupted or the TV does not support the file type, the 

“Not Supported File Format” message appears.

 

x

The TV cannot play MP3 files with DRM that have been 

downloaded from a for-pay site. Digital Rights Management 

(DRM) is a technology that supports the creation, distribution, 

and management of digital content in an integrated and 

comprehensive way, including protecting the rights and interests 

of content providers, preventing illegal copying of contents, and 

managing billing and settlements.

[UH4005-ZA]BN68-05829L-00ENG.indb   1

2014-06-25     3:15:44

Reviews: