3-2
3. Disassembly and Reassemble
Description
Picture Description
Screws
3
Remove the screws of ASSY COVER
P-REAR.
40": 14 EA
•
48": 17 EA
•
55": 18 EA
•
Torque :
7~ 8Kgf.cm.
6001-002755
In this step, two types of screws are
used.
60": 18 EA/1 EA
•
65": 18 EA/1 EA
•
Torque :
9~ 10Kgf.cm.
6003-000003
(60"/65")
4
Remove the ASSY COVER P-REAR.
5
Remove the Electric tapes shown on the
image.
EMI Point
•
: After removing release
paper from the LVDS Cable bottom,
attach the LVDS Cable to the C/
Chassis and rub the attatched
surface.
CAUTION
When assembling the TV, the electric
tapes must be applied on the same
locations.
Please remember to take a picture of
where the tapes were first applied.
Filament Tape: EMI Point
Filament Tape: Dressing Point
Cable Dressing
