116
Using the timers
Using the sleep timer
(
MENU/123
)
MENU
System
Time
Sleep Timer
Try Now
You can use this function to automatically shut off the TV after a pre-set period of time. You can set
the timer in 30 minute increments, for up to 3 hours.
Turning on the TV using the on timer
(
MENU/123
)
MENU
System
Time
On Timer
Try Now
You can set
On Timer
to make the TV turn on automatically at a specific time. You can use up to three
separate configurations:
On Timer 1
,
2
, and
3
.
On Timer
is only available when
Clock
has already been
set.
●
Setup
If you select
Manual
, you can highlight and select each day to select the specific days that you
want
On Timer
to turn on the TV.
●
Time
●
Volume
●
Source
From the list, select a signal source for the TV to use when it turns on. If you want to play
content saved in a USB device or content from an HDMI or Component source, such as a DVD
player, Blue-ray player, or set-top box, connect the device to the TV before you start On Timer
setup. For On Timer to function, you must keep the device connected to the TV.
●
Antenna
Allows you to select a broadcast signal source,
Air
or
Cable
, when source is set to
TV
.
●
Channel
Allows you to select a channel when source is set to
TV
.
